HIGHSIDER 7 inch LED main headlight FRAME-R1 type 3

HIGHSIDER LED main headlight FRAME-R1 TYPE 3, E-tested
- Mounting WITHOUT housing, there goes a light. -

Every centimeter counts to place the headlight as closely as possible between the two standpipes in the fork. REDUCED TO THE MAX was the premise behind the development of the innovative FRAME headlight mount. With the purist aluminum ring, it is possible for the first time to mount different LED headlight inserts free-standing on the motorcycle. By deliberately dispensing with a headlamp housing, an unbeatably tight installation position is made possible and, in addition, better cooling of the LED unit is achieved.

On many motorcycles shines the H4 or H7 lamp, which more or less sparkles away. Seeing better usually also means being seen better at the same time, not unimportant when summer turns to fall and in times when cars are increasingly often equipped with bright daytime running lights. Whether to replace for better visibility at night, better visibility during the day, or to give your motorcycle a nicer look, if you're looking for a stylish and innovative power headlight, the FRAME-R1 LED main headlight is an excellent choice.

Two different mounting systems are available for variable mounting of the spotlight.
- Side Mount, the conventional screw connection on the side of the lamp holder
- Bottom Mount, mounting below to the screw connection on the triple clamp

The side-mount holders can be mounted in three positions, thereby 32mm in the installation depth and 46mm in width are compensated.

Features:
- Round 7 inch headlight with CNC mounting ring and mounting kit
- Mounting WITHOUT a headlight housing
- Improves cooling
- Many installation options
- Flat installation
- Modern look, stylish-innovative
- Chromed reflector with black trim
- High beam, low beam and parking light
- Asymmetrical luminous flux
- E-approved, nothing needs to be registered

Give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series makes your bike a highlight in any case!

Dimensions:
A diameter = 200 mm
GA diameter = 168 mm
I diameter = 160 mm
T = 61 mm
R = 10 mm

Connections: 3-pin combo plug
Red cable = low beam (+)
White cable = high beam (+)
Black cable = ground (-)

Connection of position light (parking light)
Brown cable = position light (+)
Black cable = ground (-)

Scope of delivery: 1 piece

Note:
Insert asymmetrical, only approved for right-hand traffic.

HIGHSIDER LED main headlight FRAME-R1 TYPE 3, E-tested
- Mounting WITHOUT housing, there goes a light. -

Every centimeter counts to place the headlight as closely as possible between the two standpipes in the fork. REDUCED TO THE MAX was the premise behind the development of the innovative FRAME headlight mount. With the purist aluminum ring, it is possible for the first time to mount different LED headlight inserts free-standing on the motorcycle. By deliberately dispensing with a headlamp housing, an unbeatably tight installation position is made possible and, in addition, better cooling of the LED unit is achieved.

On many motorcycles shines the H4 or H7 lamp, which more or less sparkles away. Seeing better usually also means being seen better at the same time, not unimportant when summer turns to fall and in times when cars are increasingly often equipped with bright daytime running lights. Whether to replace for better visibility at night, better visibility during the day, or to give your motorcycle a nicer look, if you're looking for a stylish and innovative power headlight, the FRAME-R1 LED main headlight is an excellent choice.

Two different mounting systems are available for variable mounting of the spotlight.
- Side Mount, the conventional screw connection on the side of the lamp holder
- Bottom Mount, mounting below to the screw connection on the triple clamp

The side-mount holders can be mounted in three positions, thereby 32mm in the installation depth and 46mm in width are compensated.

Features:
- Round 7 inch headlight with CNC mounting ring and mounting kit
- Mounting WITHOUT a headlight housing
- Improves cooling
- Many installation options
- Flat installation
- Modern look, stylish-innovative
- Chromed reflector with black trim
- High beam, low beam and parking light
- Asymmetrical luminous flux
- E-approved, nothing needs to be registered

Give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series makes your bike a highlight in any case!

Dimensions:
A diameter = 200 mm
GA diameter = 168 mm
I diameter = 160 mm
T = 61 mm
R = 10 mm

Connections: 3-pin combo plug
Red cable = low beam (+)
White cable = high beam (+)
Black cable = ground (-)

Connection of position light (parking light)
Brown cable = position light (+)
Black cable = ground (-)

Scope of delivery: 1 piece

Note:
Insert asymmetrical, only approved for right-hand traffic.