motogadget motogadget motoscope classic rev counter dark edition 10.000 RPM

The Chronoclassic by motogadget is a digital multi-function instrument in a classic round case.

Technically identical to the motoscope classic, the Chronoclassic features a black dial and white hands. The design is reminiscent of old Smith instruments. Another special feature of the DarkEdition is the dark LC display. It gives the instrument an even more harmonious appearance. However, we expressly point out that the readability is reduced in direct sunlight. If you want the best possible readability, please use the green standard display.

The identical instrument is also available as an analog speedo (see analog speedo series CLASSIC).

Technical data:
Installation diameter: 80 mm
Overall diameter (screw ring): 85 mm
Depth without cable gland: 34 mm
Weight: approx. 230 g
Fastening: 3 x M4 threaded bushings
Power consumption in operation: approx. 200 mA (load dependent)
Current consumption in idle state: 0 mA
Operating voltage: 9 V - 18 V
Operating temperature: -20° +80°C

Function:
Tachometer (analog/pointer) = 0 10 krpm
Tachometer (LCD) = 0 350 km/h o. mph
Daily mileage counter = up to 999 km or mi
Total mileage (adjustable) = up to 250,000 km or mi
Driving time display = 0 99:99:99 h/min/s
Tachometer (on LCD) = 0 20.000 rpm
Adjustable speed warning (int. LED and ext. switching flash) = 0 20.000 rpm
On-board voltage display = 9 V 18 V
NEW! Low voltage warning = LED flashes when on-board voltage drops below approx. 11V - replaces charging indicator lamp
air temperature* (optional instead of water temperature) = -20 - 80 °C / -4 - 176 °F with high/low warning
water temperature* (optional instead of air temperature)) = 40 - 120 °C / 104 - 248 °F with high/low warning
oil temperature* = 40 - 160 °C / 104 - 320 °F with high/low warning
oil pressure* = 0.5 - 8 bar / 8 - 116 psi with high/low warning
time measurement = 0 - 100 km/h o. 0 - 60 mph 0.0 99.9 sec.
momentary acceleration = (-20.0) 20.0 m/s2
average speed = 0 350 km/h o. mph
maximum value speed = 0 350 km/h o. mph
maximum value speed = 0 20,000 rpm
maximum value speed = 0 350 km/h o. mph
maximum value speed = 0 20,000 rpm
max. value = 0 350 km/h o. mph
max. value = 0 350 km/h o. value = 0 350 km/h o. positive acceleration = 0 20.0 m/s2
max. negative acceleration = 0 (- 20.0) m/s2
gear indicator = N, gear 1 - 6
green control LED = idle (N)
yellow control LED = turn signal left, right
blue control LED = high beam
red warning LED = various warning functions external (e.g.B. Oil pressure switch), internal (speed, temperature, pressure, voltage)
Output for external oil pressure switch), internal (speed, temperature, pressure, voltage)
Output for external oil pressure switch Switching flash lamp = Switching capacity max. 1.4 A

Scope of delivery:
Instrument with approx. 55 cm connection cable
Complete plug connection
Fuse
Tachometer sensor M5 x 0.5 (fine thread) with 150 cm connection cable
2 x magnet
Mini-button
3x VA screws M4
Detailed mounting and operating instructions.

Note:
Please note that temperature and pressure sensors must be ordered separately (see accessories).

The Chronoclassic by motogadget is a digital multi-function instrument in a classic round case.

Technically identical to the motoscope classic, the Chronoclassic features a black dial and white hands. The design is reminiscent of old Smith instruments. Another special feature of the DarkEdition is the dark LC display. It gives the instrument an even more harmonious appearance. However, we expressly point out that the readability is reduced in direct sunlight. If you want the best possible readability, please use the green standard display.

The identical instrument is also available as an analog speedo (see analog speedo series CLASSIC).

Technical data:
Installation diameter: 80 mm
Overall diameter (screw ring): 85 mm
Depth without cable gland: 34 mm
Weight: approx. 230 g
Fastening: 3 x M4 threaded bushings
Power consumption in operation: approx. 200 mA (load dependent)
Current consumption in idle state: 0 mA
Operating voltage: 9 V - 18 V
Operating temperature: -20° +80°C

Function:
Tachometer (analog/pointer) = 0 10 krpm
Tachometer (LCD) = 0 350 km/h o. mph
Daily mileage counter = up to 999 km or mi
Total mileage (adjustable) = up to 250,000 km or mi
Driving time display = 0 99:99:99 h/min/s
Tachometer (on LCD) = 0 20.000 rpm
Adjustable speed warning (int. LED and ext. switching flash) = 0 20.000 rpm
On-board voltage display = 9 V 18 V
NEW! Low voltage warning = LED flashes when on-board voltage drops below approx. 11V - replaces charging indicator lamp
air temperature* (optional instead of water temperature) = -20 - 80 °C / -4 - 176 °F with high/low warning
water temperature* (optional instead of air temperature)) = 40 - 120 °C / 104 - 248 °F with high/low warning
oil temperature* = 40 - 160 °C / 104 - 320 °F with high/low warning
oil pressure* = 0.5 - 8 bar / 8 - 116 psi with high/low warning
time measurement = 0 - 100 km/h o. 0 - 60 mph 0.0 99.9 sec.
momentary acceleration = (-20.0) 20.0 m/s2
average speed = 0 350 km/h o. mph
maximum value speed = 0 350 km/h o. mph
maximum value speed = 0 20,000 rpm
maximum value speed = 0 350 km/h o. mph
maximum value speed = 0 20,000 rpm
max. value = 0 350 km/h o. mph
max. value = 0 350 km/h o. value = 0 350 km/h o. positive acceleration = 0 20.0 m/s2
max. negative acceleration = 0 (- 20.0) m/s2
gear indicator = N, gear 1 - 6
green control LED = idle (N)
yellow control LED = turn signal left, right
blue control LED = high beam
red warning LED = various warning functions external (e.g.B. Oil pressure switch), internal (speed, temperature, pressure, voltage)
Output for external oil pressure switch), internal (speed, temperature, pressure, voltage)
Output for external oil pressure switch Switching flash lamp = Switching capacity max. 1.4 A

Scope of delivery:
Instrument with approx. 55 cm connection cable
Complete plug connection
Fuse
Tachometer sensor M5 x 0.5 (fine thread) with 150 cm connection cable
2 x magnet
Mini-button
3x VA screws M4
Detailed mounting and operating instructions.

Note:
Please note that temperature and pressure sensors must be ordered separately (see accessories).