Description
The motoscope pro BMW R9T is the only Plug&Ride instrument on the market
The CAN-Bus interface of the motoscope pro allows the complete display of all original functions (except heating handle setting). The original connector to the wiring harness makes the instrument a real Plug&Ride solution. Simply plug in and off you go!
An LED matrix display makes an ultra-flat housing design possible. 734 individual LEDs, controlled by a 16bit Risc processor, form the self-illuminating display. They ensure optimum readability - even in direct sunlight. Automatic brightness adjustment is a matter of course. The speed is displayed via an analog LED band with drag pointer function. The main and secondary displays are self-configurable. Another display area shows the engaged gear. Four indicator lights are already integrated and can be used for far more input signals with the help of the display. The aluminium housing is milled from solid material, anodised and can be easily attached with two threaded bushes at the rear. The instrument has an ABE and does not need to be entered.
Technical data and functions:
Length/width/depth: 109 mm/ 47 mm/ 11 mm
Weight: approx. 100 g
Fastening: 2 x M3 threaded bushing
Current consumption in operation: max. 200 mA (load-dependent)
Current consumption at rest: 0.4 mA
Operating voltage: 9 V - 15 V
Operating temperature: -20° +80°C
Tachometer (LED band) = 0 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Tachometer = 0 350 km/h o. mph
Daily mileage counter A = up to 999.9 km or mi
Daily mileage counter B = up to 999.9 km or mi
Total mileage (adjustable) = up to 250000 km or mi
Operating hours counter/Service = 0 9999.5 h
Clock = 23:59 h/min
Driving time display = 0 99:59:59 h/min/s
Tachometer (on LCD) = 0 20000 rpm
Adjustable speed warning (switching flash) = 0 20000 rpm
On-board voltage display = 9 18 V
Undervoltage warning = Warning if under approx. 11V
Time measurement = 0 - 100 km/h or 0 - 60 mph = 0.00 30.59 sec.
Momentary acceleration = +/- 0.00 1.50 G
Average speed = 0 350 km/h or mph
Maximum speed = 0 350 km/h or mph
Maximum speed = 0 20000 rpm
max. positive acceleration = +1.50 G
max. negative acceleration = - 1.50 G
Gear indicator = N, gear 1 - 6
green control LED = idle (N)
green control LED = turn signal left, right
blue control LED = high beam
red warning LED = warning functions for engine warning light / ABS/low fuel
petrol/reserve = low fuel warning
scope supplied:
motoscope pro with approx. 70 cm connection cable
2 stainless steel fixing screws
detailed mounting and operating instructions
Caution:
Touch sensor is no longer included, BMW alarm system may not be compatible, heating handle control via instrument not possible.
Additional product information
Color |
Black
|
Version |
Digital
|
General Operating License (ABE) |
Download
|
English original description
The motoscope pro BMW R9T is the only Plug&Ride instrument on the market
The CAN-Bus interface of the motoscope pro allows the complete display of all original functions (except heating handle setting). The original connector to the wiring harness makes the instrument a real Plug&Ride solution. Simply plug in and off you go!
An LED matrix display makes an ultra-flat housing design possible. 734 individual LEDs, controlled by a 16bit Risc processor, form the self-illuminating display. They ensure optimum readability - even in direct sunlight. Automatic brightness adjustment is a matter of course. The speed is displayed via an analog LED band with drag pointer function. The main and secondary displays are self-configurable. Another display area shows the engaged gear. Four indicator lights are already integrated and can be used for far more input signals with the help of the display. The aluminium housing is milled from solid material, anodised and can be easily attached with two threaded bushes at the rear. The instrument has an ABE and does not need to be entered.
Technical data and functions:
Length/width/depth: 109 mm/ 47 mm/ 11 mm
Weight: approx. 100 g
Fastening: 2 x M3 threaded bushing
Current consumption in operation: max. 200 mA (load-dependent)
Current consumption at rest: 0.4 mA
Operating voltage: 9 V - 15 V
Operating temperature: -20° +80°C
Tachometer (LED band) = 0 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Tachometer = 0 350 km/h o. mph
Daily mileage counter A = up to 999.9 km or mi
Daily mileage counter B = up to 999.9 km or mi
Total mileage (adjustable) = up to 250000 km or mi
Operating hours counter/Service = 0 9999.5 h
Clock = 23:59 h/min
Driving time display = 0 99:59:59 h/min/s
Tachometer (on LCD) = 0 20000 rpm
Adjustable speed warning (switching flash) = 0 20000 rpm
On-board voltage display = 9 18 V
Undervoltage warning = Warning if under approx. 11V
Time measurement = 0 - 100 km/h or 0 - 60 mph = 0.00 30.59 sec.
Momentary acceleration = +/- 0.00 1.50 G
Average speed = 0 350 km/h or mph
Maximum speed = 0 350 km/h or mph
Maximum speed = 0 20000 rpm
max. positive acceleration = +1.50 G
max. negative acceleration = - 1.50 G
Gear indicator = N, gear 1 - 6
green control LED = idle (N)
green control LED = turn signal left, right
blue control LED = high beam
red warning LED = warning functions for engine warning light / ABS/low fuel
petrol/reserve = low fuel warning
scope supplied:
motoscope pro with approx. 70 cm connection cable
2 stainless steel fixing screws
detailed mounting and operating instructions
Caution:
Touch sensor is no longer included, BMW alarm system may not be compatible, heating handle control via instrument not possible.