피벗 키 시스템 - 후면에 위치한 특수 마그네슘 키는 장치의 편리한 전면 개방을 허용하고 비상 시 해체 할 수 있습니다.
피팅 시스템 - 어깨 높이의 미세 한 조정은 특히 짧은 목을 가진 개인을위한 개인화 된 착용감을 할 수 있습니다.
후방 안정기 시스템 - 후면 안정기(뒷면에 있는 부분)에 큰 하중이 전달되는 경우 뒤쪽으로 전달될 수 있는 극단적인 하중을 완화하도록 설계된 여러 개의 굽힘 및 파손 지점이 있습니다.
칼라 뼈 보존 1 - 몸체와 접촉하는 모든 부품은 확장된 폼 화합물을 사용하여 가장 넓은 영역에 충격력을 분산하면서도 가볍게 유지합니다.
칼라 뼈 보존 2 - 연속 프레임 부재가 어깨 위로 실행됩니다. 즉, 프레임의 중요한 부분에는 약점이 없으며 사고 발생 시 어깨나 쇄골에 빠질 수 있는 금속 핀이나 나사가 어깨 바로 위에 있지 않습니다.
스트랩 시스템 선택 - BNS는 X-스트랩 시스템과 함께 제공되어 져지 위 또는 아래에 착용할 수 있는 작고 가벼운 스트랩으로 라이더에게 장치를 고정할 수 있습니다. 더 큰 A-스트랩 어셈블리(별도의 액세서리로 사용 가능)는 보호구를 몸에 단단히 대고 착용하려는 사람들에게 전통적인 가슴 스트랩을 제공합니다.
액세서리 장착 지점 – BNS를 다른 Alpinestars 액세서리와 통합할 수 있습니다.
XS 크기로 제공됩니다.
참고: 어떤 제품도 사고의 다양한 역학으로 인해 모든 오토바이 부상으로부터 보호를 보장 할 수는 없지만 BNS는 목 부상을 끝낼 가능성을 실질적으로 줄이도록 설계되었습니다. BNS는 다른 목 지지 시스템과 마찬가지로 모든 경우에 부상을 예방하지 못할 수 있습니다.
물자:
60% 폴리우레탄
25%EVA
8% 폴리아미드
5% 스틸
2%마그네슘
원 영문 설명
Alpinestars Bionic Neck Support (BNS) is a structure designed to work with a helmet to reduce the risk and severity of a catastrophic neck injury (i.e. paralyzing injury). The new BNS SB model composition is a blend of strengthened polyurethane with variable density EVA foam.
BIONIC NECK SUPPORT:
Function
The Bionic Neck Support functions by providing an alternative load path for the energy that compresses the neck. If the helmet is in contact with the BNS at the moment of impact the overall load passing through the neck can be reduced, which may prevent a fracture from occurring.
The BNS also helps reduce the chance of muscular injuries associated with extremes of head movement.
While it is not possible to eliminate the risk of any form of injury, the BNS is designed to help prevent the most serious damage and minimize the risk of collateral injury as the impact load is channeled away from the neck.
When compared to soft neck roll devices, the protection afforded is significantly better since soft devices deform on impact, offering no protection against the damaging compressive forces.
As with any riding equipment, fit is critical to ensuring the most effective protection possible and riders should choose the equipment that is best suited to their body. No neck device should roll around over the shoulders.
Key Features
Mainframe construction is a blend of reinforced Polyurethane composite material extensively impact tested at varying temperatures to ensure the neck ring stays intact.
Two different EVA foam densities are used in the BNS SB: Firmer EVA in the shoulders and softer EVA on the chest and back for comfort.
Pivot Key system - A special magnesium key located at the rear allows convenient front opening of the device and allows for dismantling in an emergency.
Fitting System - Fine adjustment of the shoulder height allows a personalized fit particularly for individuals with shorter necks.
Rear Stabilizer system - In the event of large loads being channeled onto the rear stabilizer (the part that sits on the back) there are several bending and fracture points designed to relieve extreme loads that may be transmitted down the back.
Collar Bone preservation 1 - All parts in contact with the body use an expanded foam compound to distribute the impact force over the widest area, yet remain lightweight.
Collar Bone preservation 2 - A continuous frame member runs over the shoulders. This means there are no weak points in a critical part of the frame and that there are no metal pins or screws sitting directly above the shoulders which could be dislodged into the shoulders or collarbone during an accident.
Choice of Strap Systems - The BNS is supplied with the X-Strap System which allows a small, light strap worn over or under the jersey to secure the device to the rider. The larger A-Strap assembly (available as a separate accessory) provides a traditional chest strap for those who like to wear the protector tight against the body.
Mounting points for accessories – Allow for integration of the BNS with other Alpinestars accessories.
Available in XS sizes.
Note: While no product can guarantee protection from all motorcycle injuries due to the varied dynamics of accidents, the BNS is designed to substantially reduce the likelihood of a career ending neck injury. The BNS, as with other neck support systems, may not prevent injuries in all cases.
Material:
60%POLYURETHANE
25%EVA
8%POLYAMIDE
5%STEEL
2%MAGNESIUM
평가 (4)
Alpinestars Bionic SB Neck Suppert 목 저녁 식사 에 대한 고객 평가