Zestaw walizek SW-Motech Adventure - Czarny. Honda CRF1000L Sporty przygodowe (18-).

PRO Bagażnik boczny

• Wyjątkowa trwałość dzięki zoptymalizowanemu kształtowi i stali o grubości 2,5 mm
• Idealne dopasowanie, zaprojektowane tak, aby przylegało do roweru
• W pełni zdejmowany dzięki nowo opracowanym, jeszcze bardziej wytrzymałym szybkozłączkom
• Dostępna opcjonalna ochrona przed kradzieżą
• W przypadku montażu na stałe szybkozłączki można zastąpić częściami standardowymi (M8)
• Liczne otwory funkcyjne, kompatybilne m.in. z systemem RotopaX
• Prosty montaż na oryginalnych punktach montażowych
• Skuteczna ochrona przed korozją dzięki malowaniu proszkowemu
• Bezpieczne mocowanie do worków TRAX, AERO i SysBag z płytą adaptera (SysBag 15, 30, WP L)
• Dostępne są również zestawy adapterów do mocowania futerałów Givi/Kappa, Krauser i Shad

• Szczegóły

• Materiał: Stal
• Powierzchnia: malowana proszkowo
• Kolor: czarny
• Waga całkowita: ok. 5,3 kg / ok. 11,7 funta
• Szerokość zabudowana na motocyklu: 55,0 cm / 21,7 cala

• Nuta

• Zestawy adapterów są wymagane do obudów aluminiowych SW-MOTECH i innych producentów, a także do kufrów bocznych AERO ABS i SysBag z płytami adaptera (SysBag 15, 30, WP L).

Zestaw adapterów do bagażnika bocznego PRO

• Zestaw adapterów do mocowania kufra bocznego TRAX lub NANUK do bagażnika bocznego SW-MOTECH PRO
• Montowany do istniejących otworów bagażnika bocznego SW-MOTECH PRO
• Na lewą i prawą stronę

• Szczegóły

• Waga całkowita: ok. 0,3 kg / ok. 0,7 funta

TRAX ADV L Aluminiowa obudowa

• Model na lewą stronę motocykla
• Ochrona przed utlenianiem i ścieraniem dzięki czarnej powłoce proszkowej, łatwa do czyszczenia powierzchnia
• Solidna i wodoszczelna kufer boczny wykonany z aluminium
• Duże fazowanie po bokach zapewnia duży prześwit podczas pokonywania zakrętów, dodatkowa ochrona przed narożnikami z tworzywa sztucznego wzmocnionego włóknem szklanym
• Spawanie sterowane przez robota i nitowanie bezotworowe zapobiegają przedostawaniu się wilgoci
• Nawet po załadowaniu, całkowicie zdejmowana pokrywa z szybkozłączką
• 4 duże mocowania zintegrowane z konstrukcją pokrywy (np. na namiot lub torbę na akcesoria)
• Wysoka stabilność dzięki wytłoczonym wzorom, spawanym krawędziom i fabrycznie zamontowanej szynie mocującej
• Zawiasy wykonane ze stali nierdzewnej, klamki z anodowanego aluminium
• Ograniczniki pokrywy zapewniają dodatkową stabilność podczas korzystania z dodatkowego bagażu na pokrywie
• Wymienna uszczelka pokrywy
• Membrana ułatwia otwieranie pokrywy, nawet w przypadku ekstremalnych wahań ciśnienia i temperatury
• Szybki montaż na wszystkich bagażnikach PRO i EVO (adaptery sprzedawane oddzielnie)
• Dostępne są również zestawy adapterów do montażu na dźwigarach innych producentów, takich jak Givi i Hepco & Becker
• Zestaw zamków z 6 identycznymi zamkami jest dostępny jako opcja i nie wchodzi w zakres dostawy

• Szczegóły

• Materiał: Glin
• Wytrzymałość materiału: 0,15 cm / 0,06 cala
• Powierzchnia: malowana proszkowo
• Kolor: czarny
• Rozmiar: 49,0 x 28,0 x 37,0 cm / 19,3 x 11,0 x 14,6 cala
• Waga całkowita: ok. 5,4 kg / ok. 11,9 funta
• Pojemność całkowita: 45,0 l

PRO Side carrier

• Extremely durable due to its optimized shape and 2.5 mm thick steel
• Perfect fit, designed to fit close to the bike
• Fully removable with newly developed, even more robust quick-release fasteners
• Optional anti-theft protection available
• For permanent mounting, quick-release fasteners can be replaced with standard parts (M8)
• Numerous functional bores, compatible with the RotopaX system among others
• Simple mounting on original mounting points
• Powerful corrosion protection thanks to powder coating
• Secure hold for TRAX, AERO and SysBags with adapter plate (SysBag 15, 30, WP L)
• Adapter kits for attaching cases from Givi/Kappa, Krauser and Shad are also available

• Details

• Material: Steel
• Surface: powder coated
• Color: black
• Total Weight: appr. 5,3 kg / appr. 11.7 lb
• Width built onto motorcycle: 55,0 cm / 21.7 in

• Note

• Adapter kits are required for aluminum cases from SW-MOTECH and other manufacturers and also for AERO ABS side cases and SysBags with adapter plates (SysBag 15, 30, WP L).

Adapter kit for PRO side carrier

• Adapter kit for attaching a TRAX or NANUK side case to an SW-MOTECH PRO side carrier
• Mounted on to the existing holes of the SW-MOTECH PRO side carrier
• For left and right sides

• Details

• Total Weight: appr. 0,3 kg / appr. 0.7 lb

TRAX ADV L Aluminium case

• Model for the left side of the motorcycle
• Protection against oxidation and abrasion thanks to black powder coating, easy to clean surface
• Sturdy and watertight side case made from aluminium
• Large chamfer on sides for plenty of ground clearance for cornering, additional protection from glass fiber reinforced plastic corner caps
• Robot-guided welding and self-piercing riveting prevent dampness from getting in
• Even when loaded, completely removable lid with quick-release fastener
• 4 large tie-downs integrated into the lid design (e. g. for a tent or accessory bag)
• High stability thanks to the embossed patterns, welded edges and pre-installed retaining rail
• Hinges made from stainless steel, handles made from anodized aluminum
• Lid limiters provide additional stability when using extra luggage on the lid
• Exchangeable cover gasket
• The membrane makes it easy to open the lid, even in case of extreme pressure and temperature fluctuations
• Quick mounting on to all PRO and EVO luggage carriers (adapters sold separately)
• Adapter kits also available for mounting on to girders from other manufacturers such as Givi and Hepco & Becker
• A lock set with 6 identical locks is available as an option and is not included in delivery

• Details

• Material: Aluminum
• Material strength: 0,15 cm / 0.06 in
• Surface: powder coated
• Color: black
• Size: 49,0 x 28,0 x 37,0 cm / 19.3 x 11.0 x 14.6 in
• Total Weight: appr. 5,4 kg / appr. 11.9 lb
• Total Volume: 45,0 l

• Note

• Also available as a TRAX ADV aluminum case system with 2 side cases, bike-specific side carriers, adapters and lock set.

• Required for mounting

• Side carrier, adapter kit, TRAX lock set

TRAX ADV M Aluminium case

• Model for the right side of the motorcycle
• Protection against oxidation and abrasion thanks to black powder coating, easy to clean surface
• Sturdy and watertight side case made from aluminium
• Large chamfer on sides for plenty of ground clearance for cornering, additional protection from glass fiber reinforced plastic corner caps
• Robot-guided welding and self-piercing riveting prevent dampness from getting in
• Even when loaded, completely removable lid with quick-release fastener
• 4 large tie-downs integrated into the lid design (e. g. for a tent or accessory bag)
• High stability thanks to the embossed patterns, welded edges and pre-installed retaining rail
• Hinges made from stainless steel, handles made from anodized aluminum
• Lid limiters provide additional stability when using extra luggage on the lid
• Exchangeable cover gasket
• The membrane makes it easy to open the lid, even in case of extreme pressure and temperature fluctuations
• Quick mounting on to all PRO and EVO luggage carriers (adapters sold separately)
• Adapter kits also available for mounting on to girders from other manufacturers such as Givi and Hepco & Becker
• A lock set with 6 identical locks is available as an option and is not included in delivery

• Details

• Material: Aluminum
• Surface: powder coated
• Color: black
• Size: 49,0 x 23,0 x 37,0 cm / 19.3 x 9.1 x 14.6 in
• Total Weight: appr. 5,1 kg / appr. 11.2 lb
• Total Volume: 37,0 l

• Note

• Also available as a TRAX ADV aluminum case system with 2 side cases, bike-specific side carriers, adapters and lock set.

• Required for mounting

• Side carrier, adapter kit, TRAX lock set

TRAX lock set with PRO anti-theft protection

• 9 matching locks
• With anti-theft protection for PRO side carrier
• Compatible with side cases and top cases from the TRAX ADV and TRAX ION series
• One key for all locks

• Details

• Total Weight: appr. 0,5 kg / appr. 1.0 lb

Multi-tool key chain attachment

• Multitool as practical key chain
• Quick-release fastener opener for EVO and PRO side carriers
• Hex key (14 mm) - ideal for many motorcycle mirrors
• Hex keys in four additional sizes (8, 10, 12, 13 mm)
• Bottle opener
• Key chain eyelet
• With laser-etched SW-MOTECH logo

• Details

• Material: Stainless steel
• Surface: brushed
• Color: silver
• Total Weight: appr. 0,0 kg / appr. 0.1 lb

ADVENTURE-RACK

• Extremely robust rack for long tours and off-road rides
• Exclusive manufacturing processes and its optimized shape lend an extra dose of stability to the ADVENTURE-RACK
• Its extreme durability during vibrations, impacts and high weight was tested in the lab and off-road under harshest conditions
• Multiple functional bores: for TRAX top cases. SysBag with adapter plate are available separately with the appropriate adapter kit
• Adapter kits for attaching top cases by other manufacturers (Givi Monokey and Monolock, Krauser, Shad I und II) also available
• Easy rigging of luggage on numerous, large lashing eyes, threading of 25 mm fasteners possible
• Especially large contact surface (Width: 32.9 cm at the front, 22.5 cm at the back, Length: 30.3 cm)
• Easy installation on original attachment points with bike-specific attachment elements
• Effective corrosion protection from black powder coating
• Made of light but sturdy 4mm-thick aluminum alloy

• Details

• Material: Aluminum
• Material strength: 0,40 cm / 0.16 in
• Surface: powder coated
• Color: black
• Total Weight: appr. 2,0 kg / appr. 4.5 lb

Adapter kit for ADVENTURE-RACK

• Adapter kit for attaching a TRAX top case onto an ADVENTURE-RACK
• Compatible with TRAX ADV, TRAX ION and TRAX EVO top cases by SW-MOTECH
• Easy mounting: the adapter kit is screwed onto the rack

• Details

• Material: Polyamide / Stainless steel
• Color: black / silver
• Total Weight: appr. 0,2 kg / appr. 0.4 lb

• Note

• The adapter kits for Sysbag 15/30 are already included in delivery together with the rear panel-mounted adapter plates.

TRAX ADV Top case

• Protection from corrosion and wear due to black powder coating
• Premium top case made from 1.5 mm-thick aluminum
• Hinged lid with lid limiter, stainless steel latch, sturdy carrying handles and integrated mounting points
• 100% water- and dustproof due to robotic welding and punch rivet technology
• Theft protection: Case lid and case can be locked when on the carrier
• High stability thanks to the visually appealing and functional embossed sheet metal
• Additional protection from corners made of glassfiber-reinforced polyamide
• Easy to clean surface
• A lock set with 2 identical locks is available as an option and included in delivery when purchasing a TRAX ADV top case system

• Details

• Material: Aluminum
• Material strength: 0,15 cm / 0.06 in
• Surface: powder coated
• Color: black
• Size: 41,0 x 34,0 x 33,0 cm / 16.1 x 13.4 x 13.0 in
• Total Weight: appr. 4,8 kg / appr. 10.6 lb
• Total Volume: 38,0 l

• Note

• Also available as a TRAX ADV top case system with ADVENTURE-RACK, adapters and lock set.

TRAX WP M/L accessory bag

• Waterproof accessory bag that can be lashed onto side cases
• For side cases from SW-MOTECH and other brands (such as BMW, for ex.)
• 15 litres of additional storage, padded
• Circumferential, waterproof zipper enables quick access to the entire contents
• Overlapping lid is secured using plastic clips
• Divider for custom organisation of the interior
• Made of robust, easy to clean material
• Sleek design with reflective details
• Sturdy carrying handle
• 8 D-rings offer flexible lashing options (spacing of the inner D-rings: approx. 24 cm, spacing of the outer D-rings: approx. 32 cm)

• Details

• Material: 500D Polyester
• Color: black
• Size: 45,0 x 15,0 x 22,0 cm / 17.7 x 5.9 x 8.7 in
• Total Weight: appr. 1,3 kg / appr. 2.9 lb
• Total Volume: 15,0 l

• Note

• The TRAX WP M/L accessory bag fits perfectly on the TRAX ADV and TRAX ION side cases from SW-MOTECH.