최고의 라이딩을 안전하게 캡처하세요. 비포장 트랙, 도로 여행 또는 트랙 데이를 위한 카메라 마운트에 이상적입니다.
기능:
완전히 새로워진 강력한 범용 클램프로 카메라를 핸들바, 범퍼 등에 안전하게 고정합니다.
유연한 접착식 마운트는 헬멧, 연료 탱크 또는 앞유리에 완벽하게 맞아 더 많은 촬영 각도를 제공합니다.
새로운 헤비 듀티 클램프, 심각하게 견고합니다.
신뢰할 수 있는 강력한 클램프로, 볼 조인트가 없는 완전히 새로운 디자인을 활용하여 안정적인 샷을 할 수 있습니다.
더 많은 옵션을 위한 유연한 접착 마운트.
곡면용으로 설계되어 접착력이 보장됩니다.
사양:
무게(헤비 듀티 클램프 마운트): 272g(9.6oz)
치수(헤비 듀티 클램프 마운트): 124x73x53mm(4.9x2.9x2.0in)
무게(플렉시블 접착식 마운트): 40g(1.4oz)
크기(플렉시블 접착식 마운트): 66.5x66.5x48mm(2.6x2.6x1.9인치)
호환성:
Ace Pro, Ace, Go3, X3, One RS(Twin/4K), GO2, ONE X2, One R, One X, One
노트:
다음 지침에 따라 Flexible Adhesive Mount를 사용하십시오.
사용하기 전에 청소용 물티슈로 베이스를 청소하십시오. 표면이 깨끗하고 건조하며 매끄러운지 확인하십시오.
끈적끈적한 베이스가 표면에서 분리되면 재사용할 수 없습니다.
강하게 고정하려면 표면에 붙은 후 제품을 30초 동안 길게 누르세요.
제품과 함께 사용하려면 부착 후 최소 24시간을 기다리십시오.
3구 어댑터가 마모된 경우 미끄럼 방지 링을 부착하여 보안을 강화하십시오.
이 제품은 셀카봉과 함께 사용할 수 없습니다.
헤비 듀티 클램프 마운트는 직경이 17mm에서 37mm 범위의 물체와 호환됩니다.
헤비 듀티 Cl을 부착할 때amp 매끄러운 금속 튜브에 마운트를 장착하려면 포함된 렌치를 사용하여 조이는 것이 좋습니다.
헤비 듀티 클램프 마운트에 셀카봉을 설치할 때 ≤100cm까지 확장된 Insta360 Action 인비저블 셀카봉을 사용하는 것이 좋습니다.
헤비 듀티 클램프 마운트의 1/4" 나사를 사용하여 셀카봉만 연결하십시오. 다른 액세서리를 설치한 후 셀카봉을 추가하지 마세요.
카메라를 헤비 듀티 Cl에 직접 장착하는 경우amp 마운트, 최대 속도는 부드러운 도로에서 80km/h, 오프로드에서 40km/h를 초과해서는 안 됩니다. 부드러운 도로를 주행할 때만 셀카봉을 오토바이에 장착하고 사용하기 전에 포함된 렌치로 셀카봉을 조였는지 확인하십시오.
플렉시블 접착 마운트와 헤비 듀티 Cl 설치amp 설명서의 지침에 따라 마운트. Insta360은 설정이 설명서의 지침과 일치하지 않을 경우 발생하는 손상이나 손실에 대해 책임을 지지 않습니다.
목차:
1x 헤비 듀티 클램프 마운트
2x 플렉시블 접착 마운트(3M 스티커 포함)
8x 미끄럼 방지 링
1x 육각 렌치
2x 1/4" - 2구 어댑터
1x 1/4" 카메라 마운트 어댑터
3x 나비 나사
1x 클램프 마운트 렌치
원 영문 설명
Insta360 Standard Motocycle Mount Bundle
Your best rides, captured safely. Ideal for camera mounts for dirt tracks, road trips or track days.
Features:
All-new universal powerful clamp, securely fixing your camera to handlebars, bumpers, and more.
Flexible adhesive mount, fits perfectly on your helmet, fuel tank, or windshield, unlocking even more shooting angles.
New heavy duty clamp, seriously sturdy.
A powerful clamp that you can depend on, utilizing an all-new design with no ball joint for stabler shots.
Flexible adhesive mount for even more options.
Designed for curved surfaces, guaranteed to stick.
Ace Pro, Ace, Go3, X3, One RS (Twin/4K), GO2, ONE X2, ONE R, ONE X, ONE
Notes:
Follow these instructions to use the Flexible Adhesive Mount:
Clean the base with a cleaning wipe before use. Ensure the surface is clean, dry and smooth.
If the sticky base detaches from the surface, it cannot be reused.
To ensure a strong hold, press and hold the product for 30 seconds after sticking to a surface.
Wait at least 24 hours after sticking to use it with a product.
If the 3-prong adapter becomes worn, apply the anti-slip ring for more security.
This product cannot be used with any selfie sticks.
The Heavy Duty Clamp Mount is compatible with objects ranging from 17mm to 37mm in diameter.
When attaching the Heavy Duty Clamp Mount to a smooth metal tube, it is recommended to use the included wrench to tighten it.
When installing a selfie stick on the Heavy Duty Clamp Mount, we recommend you use the Insta360 Action Invisible Selfie Stick, extended to ≤100cm.
Only connect the selfie stick using the 1/4" screw on the Heavy Duty Clamp Mount. Do not install other accessories and then add the selfie stick.
If mounting the camera directly to the Heavy Duty Clamp Mount, maximum speed should not exceed 80km/h on smooth roads, or 40km/h when going off-road. Only mount the selfie stick on the motorcycle when riding on smooth roads and ensure the mount is tightened with the included wrench before use.
Install the Flexible Adhesive Mount and Heavy Duty Clamp Mount according to the instructions in the manual. Insta360 will not be responsible for any damage or loss that occurs if setup does not match the instructions in the manual.