Alpinestars Supertech M10 Lee Design 越野摩托車頭盔

阿爾卑斯之星超級科技M10李設計越野摩托車頭盔

S-M10的設計與Alpinestars的理念一致，並與產品群組中的其他產品共用獨特的主題;光滑，有吸引力的輪廓，流線型，沒有任何外部通道和特徵，這些通道和特徵可能會在衝擊中充當負載點，或損害結構的整體完整性。表面曲率有助於減少撞擊時的摩擦，允許偏轉和最有效的能量傳遞，以保護騎手的頭部免受直接作用於顱骨和頸部和脊柱。孔徑設計用於容納各種護目鏡，外殼中的通風口位於其中，以最大限度地提高通風效率。

特徵：

• S-M10 外殼的輪廓以性能為優先，其設計風格將頭盔的輪廓及其雕刻表面識別為獨特的“Alpinestars”。
• 另一個關鍵特性是 S-M10 殼體尺寸解決方案;每種頭盔貼合尺寸都有自己合適的外殼尺寸，為全球各種貼合需求提供最符合解剖學的解決方案。
• 頭盔的外殼結構採用高度先進的成型技術和多複合材料組合。
• 3K碳，高密度碳外層，可提高外殼能量耗散的強度和效率。
• 單向碳複合材料層，在殼體周圍提供顯著更大的徑向強度，防止壓縮，但允許控制偏轉以減少傳遞的衝擊能量。
• 芳綸纖維層，提供關鍵的滲透保護。
• 這種層的組合通過環氧樹脂粘合提供了更高的性能，可提供最佳的強度和能量管理;有限的外殼偏轉意味著能量擴散得更寬，並且更好地被 EPS 襯裡吸收。
• S-M10 結構中採用的獨特外殼疊層工藝的結果產生了極其有效的衝擊保護。在Alpinestars賽車開發中心內，憑藉設備齊全的頭盔測試設施，一項詳盡的衝擊研究計劃使Supertech M10返回線性和傾斜衝擊性能，大大改善了當前的頭盔監管標準限制。對於直接、線性、衝擊，平均幅度為 41%，對於旋轉加速度、傾斜、衝擊性能平均為 48%。

Alpinestars Supertech M10 Lee Design Motocross Helmet

The S-M10’s design is coherent to Alpinestars philosophy and shares distinctive themes with other products in the portfolio; a smooth, attractive, profile which is streamlined and free of any external channels and features that might act as a load point in an impact, or compromise the overall integrity of the construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column. The aperture is designed to accommodate a wide variety of goggles and the air vents in the shell are located to maximize ventilation efficiency.

Features:

• The S-M10 shell has been profiled with performance as a priority and with a design style that identifies the profile of the helmet and its sculpted surface as uniquely ‘Alpinestars’.
• Another key feature is the S-M10 shell sizing solution; each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide.
• The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination.
• 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell.
• Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy.
• Aramid fiber layer which provides critical penetration protection.
• This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the EPS liner.
• The result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. With a fully equipped helmet testing facility, within Alpinestars Racing Development Center, an exhaustive impact research program has resulted in the Supertech M10 returning linear and oblique impact performance which far improves upon current helmet regulation standard limits. For direct, linear, impact by an average magnitude of 41% and for rotational acceleration, oblique, impact performance by an average of 48%.