Arai RX-7V 頭盔

在任何的頭盔，任何品牌的可吸收是能量的有限的。看了一眼關閉影響有助於擴展 （或最大化） 真實情景中的能量吸收能力。因此，Arai 一直在追求一個更堅硬的外殼和更順暢更容易掉衝擊能量看一眼的形狀。盾掛載機制中的一小步是當前盾透視操作的必要條件。提高了衝擊能量的潛力，降低 VAS 樞軸蓋大小，其殼體上的地位降低，
yeilding 關於試驗線的殼標準，使得更多的殼的要順利寺景區的測試線條內額外 24 毫米平均。

通常盾安裝位置必須保持相對較高，因為較低的遮罩資料透視不會允許盾來打開或關閉。
西貢遮罩系統只有一個單一的軸 （支點） 對於盾構操作，但輸精管有可變軸 （移動樞軸點）。
Vas 評分模型的盾構操作基於虛軸針軌跡和雙軸點的兩個軌跡相結合使成為可能。這允許盾打開和關閉甚至與 24 毫米低盾裝載位置。

雙功能級別版本的側蓋/pod 和遮罩針為快速及簡單的遮罩去除。能夠看到遮罩機制允許更容易盾變化。

隨著盾構閂鎖系統捕獲並持有盾更安全封閉，以説明防止意外的打開。除了一個 demist 函數，較大的閂鎖設計可以使盾直觀和無縫操作。

PB SNC² 殼
超級纖維和其他特別的合成纖維，精湛的拉伸強度和 flexabiliity 的特性，為 F-1 頭盔面罩面板開發、 裝配和保稅 Arai 專家。用來裝一桶在一起，用各種仔細的鋼帶，如堆積和模制材料。新開發的樹脂創建更為緊密的聯繫殼體材料，重量輕。

擴壓器類型 12
新類型 12 擴散是 20 毫米長和拉直改善空氣動力學，一道空中聯隊負責，提高穩定性。相比以前的類型 10 風口，攝入杓的新類型 12 擴壓器的效率增加了 19%。新的空氣通風口不僅有更多可調三個職位;關閉，一半打開和充分但也有助於改善密封，減少風雜訊和水入侵。

生態純班輪
新生態純材料，有助於保持人體皮膚和抗菌藥物消耗量的中性酸度充分可拆卸的內部襯墊系統已得到改善。以一個更柔和、 更深入和更舒適的適合我們開發了一種新的軟襯板框架材料。新的襯墊也已允許為一個定制適合的可調寺填充。

VAS V MV 盾
增值業務最大的願景盾是騎馬的標準提供更佳的可視性，在所有季節和為所有類型。標配有明確防霧 Pinlock 插入要安裝所需。

In any helmet, regardless of brand, the amount of energy that can be absorbed is limited. Glancing off impacts helps to extend (or maximize) that energy absorbtion capacity in real scenarios. Therefore, Arai has been pursuing a stronger shell and smoother shape that is more likely to glance off impact energy. A small step in the shield mounting mechanism was necessary for the current shield pivot operation. To increase the potential to glance off impact energy, the VAS pivot cover size was reduced and its position on the shell lowered,
yeilding an average of an additional 24mm with reference to the test line of the Shell Standard, allowing more of the shell to be smoother within the test lines of the temple area.

Normally the shield mounting position must remain relatively high, because a lower shield pivot will not allow the shield to open or close.
The SAI shield system has only a single axis (pivot point) for the shield operation, but VAS has a variable axis (moving pivot point).
The shield operation on the VAS model was made possible by combining the Pin trajectory based on an imaginary axis, and the two trajectories of double pivot points. This allows shield opening and closing even with the 24mm lower shield mount postion.

Dual function level releases both the side cover/pod and shield pin for quick & simple shield removal. Being able to see the shield mechanism allows for easier shield changes.

AS shield latch system captures and holds the shield more securely closed to help prevent unexpected opening. In addition to a demist function, the larger latch design allows for an intuitive and seamless operation of the shield.

PB SNC² Shell
Super Fiber and other special synthetic fibers, with superb tensil strength and flexabiliity characteristics, developed for F-1 helmet visor panel, assembled and bonded by Arai experts. Such as the steel belts used to hold a barrel together, with a variety of carefully stacked and molded materials. Newly developed resin creates stronger bonds between shell materials with less weight.

Diffuser Type 12
New Type 12 diffusers are 20mm longer and straightened for improved aerodynamics, working together with the AirWing to improve stability. Compared to the previous Type 10 diffusers, the efficiency of the intake scoops of the new Type 12 diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions; closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion.

Eco Pure Liner
The fully removable interior liner system has been improved with new Eco Pure material, which helps maintain neutral acidity levels close to human skin and consumption. With the aim of a softer, deeper and even more comfortable fit we developed a new softer liner frame material. The new liner also has adjustable temple padding that allows for a customized fit.

VAS V MV Shield
VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed.