CLUBMAN 1 英寸铝制车把 CLUBMAN® 带开槽孔

LSL 的 1 英寸（25.4 毫米）铝制车把

LSL代表着卓越的车把质量。这是由于公司自己选择的材料和材料处理以及车把的生产质量，几十年来一直在优化。

作为欧洲唯一的车把制造商，LSL 还提供铝制车把系列的外径为 25.4 毫米（1 英寸）的变体。因此，LSL满足了对运动型车把类型的需求。这些车把在夹紧区域的内侧进行了加固，尽管铝的典型重量很轻，但仍具有非凡的刚度。

连续外径为 25.4 mm，车把末端的壁厚为 4 mm（内部为 17.4 mm）。表面经过哑光喷砂或高光抛光处理，并根据车把类型提供不同的阳极氧化颜色。

车把没有孔，用于开关配件的防旋转保护。
我们建议使用 LSL 钻孔模板以最佳方式从标准车把上转移钻孔的位置。

所有 LSL 车把均配备 ABE。
模型范围很大，并且每年都会有新条目进行扩展。
ABE可靠地记录了哪种车把类型适合并被批准用于摩托车。

通常，ABE中的作业是无条件的。
但是，也有例外。
因此，请查看您的摩托车在 ABE 中的条目。
如果您在 ABE 中找不到您的车辆，ABE 可以用作个人批准的随附文件。

供货范围：1件

保养说明：
- 所有车把及其表面型号仅使用无酸碱清洁剂！
- 切勿在阳光直射下使用，也不要让清洁剂变干。
- 避免接触制动液、制动清洁剂、机油、燃油、带有研磨颗粒的抛光膏等，立即用软布吸收任何滴落物。
- 使用前测试清洁剂在不显眼区域的相容性！
- 如果清洁和保养不当，则不作任何保证或保证。

1 inch (25.4mm) aluminum handlebars from LSL

LSL stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades.

As the only handlebar manufacturer in Europe, LSL also offers variants with an outer diameter of 25.4 mm (1 inch) in its aluminum handlebar range. LSL thus covers the demand for sporty handlebar types. These handlebars are reinforced on the inside in the clamping area and achieve extraordinary stiffness despite the low weight typical of aluminum.

With a continuous outer diameter of 25.4 mm, the wall thickness at the handlebar ends is 4 mm (17.4 mm inside). The surface is matt bead-blasted or high-gloss polished and available in different anodized colors depending on the handlebar type.

The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.
We recommend using an LSL drilling template to transfer the position of the drill holes from the standard handlebars in the best possible way.

All LSL handlebars are supplied with ABE.
The range of models is huge and is expanded every year with new entries.
The ABE reliably documents which handlebar type fits and is approved for the motorcycle.

As a rule, the assignments in the ABE are without conditions.
However, there are also exceptions.
So take a look at the entry for your motorcycle in the ABE.
If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.

Scope of delivery: 1 piece

Care instructions:
- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!
- Never use in direct sunlight and do not allow the cleaner to dry out.
- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc. immediately absorb any dripping with a soft cloth.
- Test the compatibility of cleaning agents on an inconspicuous area before use!
- No guarantee or warranty in the event of improper cleaning and care.