川崎 Z 900 / Z H2 的高边 AKRON-RS PRO， 包括车牌照明

海西德阿克伦-RS PRO车牌持有人包括。车牌灯

车牌架HIGHSIDER AKRON-RS PRO通过其设计完美地适应了自行车的线条。

HIGHSIDER AKRON-RS PRO的型号专用支架允许安装在自行车的原始安装点上，因此无需进一步钻孔或切割即可进行更换。
为避免损坏电缆，所有锋利的贯穿件均由橡胶膜索环保护。

车牌由钢板制成，厚2毫米。精确的切割是通过激光完成的。磨边后仍遵循耐候性黑色粉末涂层。
这确保了最佳的贴合性和耐用性。
通过无级调整，您可以将板材带到所需位置，而无需钻孔。为了将板保持在该位置，还有一个额外的锁定螺钉。

HIGHSIDER AKRON-RS PRO 的转向信号支架宽度可调，因此适用于任何类型的附件转向信号灯。此调整选项允许您将转向信号灯的位置调整到最多样化的车牌。为了允许在不与线束分离的情况下安装转向信号灯，8 mm孔被开槽到侧面。

此外，您还可以通过滑块单独调整反射器的位置。因此，适应欧盟车牌的不同设计是没有问题的。

为了牢固地拧紧车牌并减少振动，包括两个橡胶垫圈。另一个橡胶缓冲器在其底部支撑车牌。

在这个专业版的HIGHSIDER AKRON-RS中，是非常小的，由高品质铝制HIGHSIDER车牌灯铣削而成，包括安装板和支撑臂。支架的高度可调，设计用于安装在法律要求的位置。

详：

- 特定型号的支架
- 无级可调转向信号灯座
- 开槽转向信号灯座，易于安装，无需电缆分离
- 无级可调反射器，经过电子测试
- 适用于欧洲车牌
- 可无级调节倾斜角度
- 附加螺钉，确保最佳位置安全性
- 易于固定，无需进一步的工作步骤（例如钻孔）
- 通过开槽孔轻松安装车牌
- 车牌灯，包括。包括支架
- 车牌灯，电子测试
- 无级可调车牌灯
- 许多不同的选项用于安装车牌灯

HIGHSIDER AKRON-RS PRO包括：

- 带安装部件的型号专用支架
- 海西德阿克伦-RS车牌持有人牌
- 可调节转向信号灯座
- 带可调节支架的电子测试反射器
- 电子测试车牌灯
- 安装说明

笔记：
- 如果侧面反光板安装在原来的车牌架上，则必须将它们重新固定在合适的位置或更换为新的。
- 特殊转向信号灯支架可选配用于原始转向信号灯。

提示：
如果您还没有为您的车辆找到特定型号的车牌持有人，那么HIGHSIDER的通用车牌持有人（有许多不同的设计可供选择）当然是一个不错的选择。

HIGHSIDER AKRON-RS PRO license plate holder incl. License plate light

The license plate holder HIGHSIDER AKRON-RS PRO adapts perfectly to the lines of your bike by its design.

The model-specific bracket of the HIGHSIDER AKRON-RS PRO allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting.
To avoid damage to cables, all sharp-edged feedthroughs are protected by a rubber membrane grommet.

The license plate is made of sheet steel and 2 mm thick. The precise cutting is done by laser. After edging still follows the weather-resistant black powder coating.
This ensures the optimal fit and durability.
Through the stepless adjustment you can bring the plate without drilling in the desired position. To keep the plate in this position, there is an additional locking screw.

The turn signal brackets of the HIGHSIDER AKRON-RS PRO are adjustable in width and thus suitable for any type of accessory turn signals. This adjustment option allows you to adjust the position for your turn signals to the most diverse license plates. To allow mounting of the turn signals without separation from the wiring harness, the 8 mm holes are slotted to the side.

Also the position of the reflector you can adjust individually via a slider. Adaptation to the different designs of EU license plates is therefore no problem.

To screw the license plate securely and reduce vibration are included two rubber washers. Another rubber buffer supports the license plate on its underside.

In this PRO version of the HIGHSIDER AKRON-RS is the very small, milled from high quality aluminum HIGHSIDER license plate light with mounting plate and support arm included. The bracket is adjustable in height and designed to allow mounting in the position required by law.

Details:

- model-specific bracket
- infinitely adjustable turn signal holder
- slotted turn signal holder for easy mounting without cable separation
- infinitely adjustable reflector, E-tested
- suitable for European license plates
- infinitely adjustable tilt angle
- additional screw for optimum position security
- easy fixation without further work steps (eg.e.g. drilling)
- easy mounting of the license plate through slotted holes
- license plate light incl. Holder included
- license plate light, E-tested
- infinitely adjustable license plate light
- many different options for mounting the license plate light

Included with the HIGHSIDER AKRON-RS PRO are:

- Model-specific bracket with mounting parts
- HIGHSIDER AKRON-RS license plate holder plate
- Adjustable turn signal holders
- E-tested reflector with adjustable holder
- E-tested license plate light
- Mounting instructions

Notes:
- If side reflectors are mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.
- Special turn signal holders are optionally available for the original turn signals.

Tip:
If you have not found a model-specific license plate holder for your vehicle, the universal license plate holders from HIGHSIDER, which are available in many different designs, are certainly a good alternative.