Insta360 X3 粘性鏡片護罩

Insta360 x3粘性鏡頭護罩

使用Insta360的鏡頭保護器，相機的鏡頭始終受到保護，不會刮擦。它直接粘在鏡頭上，以保護其免受灰塵和劃痕。

特徵：

• 為您的兩個鏡片提供保護。
• 保護鏡片免受灰塵或刮擦。

規格：

技術規格：

• 材料：聚甲基丙烯酸甲酯
• 重量：1.5 克（0.05 盎司）/ 1 件
• 尺寸（深 x 高）：34.80 x 10.95 毫米（1.37 x 0.43 英寸）

筆記：

1. 使用前，請確保相機鏡頭清潔乾燥。始終將鏡頭護罩安裝在清潔乾燥的環境中。仔細檢查是否有灰塵或其他顆粒，因為這些可能會影響拍攝效果。
2. 在安裝之前，請確保將薄防護罩安裝在相機螢幕的一側，厚防護罩用於另一側。
3. 如果從 X3 上取下鏡頭保護膜，請在重新安裝鏡頭保護罩之前塗上新的雙面粘合劑。
4. 粘性鏡頭護罩僅具有防濺功能，並非專為水下拍攝而設計。如果您打算在水下使用 X3，請取下粘性鏡頭保護套並使用 X3 潛水盒以獲得最佳效果。
5. 要取下鏡頭護罩，請使用隨附的三角形撬動工具。取下鏡頭護罩時，請注意不要划傷相機鏡頭。
6. 要更換雙面膠粘劑，請先取下用過的雙面膠粘劑，並確保鏡頭保護罩內部清潔且沒有殘留物。重複安裝過程，確保鏡頭護罩邊緣的凹口正確對齊。

內容：

• 2x 粘性鏡頭護罩
• 6x 雙面膠條
• 1x 三角形撬工具
• 1x 鏡頭布

注意：

• 請勿在水中或附近使用粘性鏡頭保護器。
• 鏡頭保護器隨附已連接的雙面膠條

Insta360 X3 Sticky Lens Guards

With the lens protector from Insta360, the lens of your camera is always protected from scratches. It sticks directly to the lens to protect it from dust and scratches.

Features:

• Protection for both of your lenses.
• Keeps lenses safe from dust or scratches.

Specifications:

Technical specifications:

• Material: Polymethyl methacrylate (PMMA)
• Weight: 1.5g (0.05oz) / 1 piece
• Dimensions (D x H): 34.80 x 10.95 mm (1.37 x 0.43 in)

Notes:

1. Before use, make sure that the camera's lens is clean and dry. Always install the Lens Guard in a clean and dry environment. Check carefully for dust or other particles, as these may affect shooting results.
2. Prior to installing, ensure that the thin guard is installed on the side with the camera screen, with the thick guard used for the opposite side.
3. If you remove the Lens Guard from X3, apply a new double-sided adhesive before re-installing the Lens Guard.
4. The Sticky Lens Guard is only splash-proof and is not designed for underwater shooting. If you are planning to use the X3 underwater, remove the Sticky Lens Guard and use the X3 Dive Case for best results.
5. To remove the Lens Guards, please use the included Triangle Prying Tool. Take care not to scratch the camera lenses as you remove the Lens Guards.
6. To change the double-sided adhesives, first remove the used double-sided adhesives and be sure that the inside of the Lens Guard is clean and has no residue. Repeat the installation process, ensuring the notch on the rim of the Lens Guard is correctly aligned.

Contents:

• 2x Sticky Lens Guards
• 6x Double-sided Adhesive Strips
• 1x Triangular Pry Tool
• 1x Lens Cloth

Note:

• Do not use the adhesive lens protector in or near water.
• The lens protector comes with the double-sided adhesive strips already attached