IXS HYDRO_BOT 膜內夾克

IXS HYDRO_BOT摩托車膜內夾克

摩托車服裝的最新技術：HYDRO_BOT按鈕即可去除水分！膜內夾克可以拉鍊到蒙得維的亞夾克。因此，從炎熱的夏季到多雨的惡劣天氣，最大使用範圍。

特徵：

• 帶活性水分輸送HYDRO_BOT插入背面的夾克
• 透氣網狀襯裡，實現最佳身體氣候
• 手銬上拉伸袖口
• 帶彈性拉繩的夾克下擺的寬度調整
• 2 個固定網內襯的內袋和 1 個小電池口袋
• 長連接拉鍊
• 夾克與蒙得維的亞空氣 2.0 夾克相容

規格：

HYDRO_BOT技術：

• HYDRO_BOT是第一個通過電滲透將水分和蒸汽從內部輸送到外部的活性水分輸送膜。這是與聯邦材料科學和技術實驗室（EMPA）合作在專業實驗室開發和測試的。
• 無論HYDRO_BOT等外部因素（如溫度和濕度）如何，均可直接以電子方式控制運輸方向和數量，並可根據要求以電子方式運輸濕氣。該膜配有數十億個毛孔/m2。當元件收到一個小的電脈衝時，水分會通過毛孔高速從身體中運出，然後從護套的外部運輸。這個過程被稱為電滲透。
• 刀片HYDRO_BOT戰略性地放置在背面最出汗的密集區域。

使用：

• 將控制盒連接到護套中HYDRO_BOT系統的電纜
• 將控制盒插入夾克中提供的口袋
• 使用 USB 充電電纜為控制盒充電。充電時紅燈閃爍。電池在正常條件下持續 16 小時
• 按下控制箱上的按鈕啟動系統：
• 按一次：永久綠燈，系統打開
• 按兩次：閃爍綠燈，系統處於待機狀態。在待機模式下HYDRO_BOT系統可以啟動和停用
• 要關閉，請按按鈕 3 秒鐘。紅燈短暫閃爍，系統關閉

護理/清潔：

• 為了獲得最佳效果，建議穿由合成材料製成的功能性內衣，具有良好的水分運輸性能。
• 清洗前必須將控制箱從護套上拆下
• 請用手或單獨在30°C下用低旋轉（最大500）或完全不旋轉清洗
• 不要滾幹，不要熨燙
• 警告：背著背包會降低系統的功能。因此，建議使用帶通風系統的背包。
• 系統本身HYDRO_BOT沒有高水柱。它像水泵一樣工作，而不是水屏障。

內容：

• 1x HYDRO_BOT膜內護套
• 1x HYDRO_BOT控制箱
• 1 HYDRO_BOT遙控器
• 1x HYDRO_BOT充電電纜

IXS HYDRO_BOT Motorcycle Membrane Inner Jacket

The latest technology in motorcycle clothing: HYDRO_BOT removes moisture at the push of a button! The membrane inner jacket can be zipped into the Montevideo jacket. Thus, the maximum range of use from hot summer to rainy bad weather is given.

Features:

• Jacket with active moisture-transporting HYDRO_BOT insert in the back
• Breathable mesh lining for an optimal body climate
• Stretch cuffs at the cuffs
• Width adjustment in the jacket hem with elastic drawstring
• 2 inside pockets in the fixed mesh lining and 1 small battery pocket
• Long connection zip
• The jacket is compatible with the Montevideo Air 2.0 jacket

Specifications:

HYDRO_BOT technology:

• HYDRO_BOT is the first active moisture-transporting membrane that transports moisture and steam from the inside to the outside by means of electro-osmosis. This was developed and tested in professional laboratories in collaboration with the Federal Laboratories for Materials Science and Technology (EMPA).
• The HYDRO_BOT fabric transports moisture electronically when required, regardless of external factors such as temperature and humidity, with direct electronic control of the direction and amount of transport. The membrane is equipped with billions of pores/m2. When the elements receive a small, electrical impulse, moisture is transported away from the body at high speed through the pores to the outside of the jacket. This process is known as electro-osmosis.
• The HYDRO_BOT insert is strategically positioned at the most sweat-intensive areas on the back.

Use:

• Connect the control box to the cable of the HYDRO_BOT system in the jacket
• Insert the control box into the pocket provided in the jacket
• Charge the control box with the USB charging cable. A red light flashes while charging. The battery lasts 16 hours under normal conditions
• Start the system by pressing the button on the control box:
• Press once: permanent green light, the system is on
• Press twice: flashing green light, the system is in standby. In standby mode the HYDRO_BOT system can be activated and deactivated
• To switch off, press the button for 3 seconds. A red light flashes briefly and the system is switched off

Care / cleaning:

• For best results, it is recommended to wear functional underwear made of synthetic materials with good moisture transport properties.
• The control box must be removed from the jacket before washing
• Please wash by hand or separately at 30 ° C with a low spin (max. 500) or completely without spinning
• Do not tumble dry and do not iron
• Warning: Carrying a backpack can reduce the functionality of the system. A backpack with a ventilation system is therefore recommended.
• The material of the HYDRO_BOT system itself does not have a high water column. It works like a water pump, not a water barrier.

Contents:

• 1x HYDRO_BOT membrane inner jacket
• 1x HYDRO_BOT control box
• 1x HYDRO_BOT remote control
• 1x HYDRO_BOT charging cable