Leatt DBX 5.0 All Mountain 夹克

Leatt DBX 5.0 全山夹克

从单一来源的设计和功能: 新的 DBX 5.0 全山夹克是基准时, 涉及到硬壳功能夹克。三层 HydraDri 采用密封接缝和焊接拉链, 使其具有透气性和防水性 (水柱可达 30, 000 毫米)。此外, 它的两侧有很大的通风口, 在肘部和肩部的材料中得到加强。有了新的引擎盖系统, 引擎盖就会停留在它该所在的位置。三个缝制的磁铁有助于在好天气下实际和安全地存放夹克。在恶劣的天气条件下, 引擎盖可以连接到头盔上的改装磁铁上, 即使在更高的速度下也能保持在适当的位置。两个大的前口袋和一个小口袋在左袖子提供了足够的空间, 安全地存放所有重要的项目和电梯票。由于 DBX 5.0 夹克的特殊切割也发现下面的保护器夹克。此外, 引擎盖, 腰带和袖子可以很容易地调整与拉绳或尼龙搭扣, 以满足您自己的需要。

特征：

• 三层液压、四向拉伸材料中的硬壳夹克
• 防水透气 (30.000/23000)
• 刷子保护肩膀和肘部上的材料增强
• 磁罩固定
• 侧面拉链上的大通风口
• 密封接缝
• 焊接的水卫兵拉链
• 前臂上有1个拉链口袋
• 可调节腰带、引擎盖和袖子
• 兼容保护套夹克和全脸头盔
• 腰带上的硅胶条可防止滑倒
• 引擎盖和背面的光反射器
• 集成镜片清洁布

规格：

引擎盖固定系统:

• 为了确保引擎盖保持在它应该的位置, 所有的 DBX 夹克都配备了一个磁性引擎盖紧固。独特的系统由四个巧妙放置的磁铁组成。其中三个被无形地缝在夹克里 (肩膀之间、引擎盖的后部和前部), 第四个被贴在头盔上。如果你不需要引擎盖, 它可以实际折叠和堆放感谢磁铁, 而不拍打疯狂, 而骑自行车。在恶劣的天气条件下, 半壳或全脸头盔上的头戴状磁铁即使在高速行驶时也能提供牢固的抓地力。

Leatt DBX 5.0 All Mountain Jacket

Design and functionality from a single source: The new DBX 5.0 All Mountain Jacket is the benchmark when it comes to hardshell functional jackets. The three-layer HydraDri makes it breathable and waterproof (water column up to 30,000mm) with sealed seams and welded zippers. In addition, it has large vents on the sides and is reinforced in material at the elbows and shoulders. With the new Hood Retention System, the hood stays where it belongs. Three sewn-on magnets help to store the jacket practically and safely in good weather. In harsher weather conditions, the hood can be attached to a retrofit magnet on the helmet and stays in place even at higher speeds. The two large front pockets and a small pocket on the left sleeve provide enough space to safely stow all important items and the lift ticket. Due to the special cut of the DBX 5.0 Jacket also finds a protector jacket underneath place. In addition, the hood, waistband and sleeves can be easily adjusted with a drawstring or Velcro to your own needs.

Features:

• hardshell jacket in three-layer HydraDri, four-way stretch material
• waterproof and breathable (30.000 / 23.000)
• brush Guard Material reinforcement on shoulders and elbows
• magnetic hood fixation
• large ventilation openings on the side zippers
• sealed seams
• welded AquaGuard zippers
• 1 zippered pocket on the forearm
• adjustable on waistband, hood and sleeves
• compatible with protector jackets and fullface helmets
• silicone strip on the waistband prevents slipping up
• light reflector on the hood and back
• integrated lens cleaning cloth

Specifications:

Hood retention system:

• To ensure that the hood stays exactly where it belongs, all DBX jackets are equipped with a magnetic hood fastening. The unique system consists of four cleverly placed magnets. Three of them are invisibly sewn into the jacket (between the shoulders, at the back and front of the hood), the fourth is attached to the helmet. If you do not need the hood, it can be practically folded and stowed thanks to the magnets, without flapping wildly while cycling. In harsher weather conditions, the hooded magnets on half-shells or full-face helmets provide a firm grip even at high speeds.