Nolan N100-5 Hilltop N-Com 頭盔

諾蘭 N100-5 山頂 N- com 頭盔

這是諾蘭的頂級翻轉頭盔。其特點是優雅的設計,其許多技術特點和廣泛的顏色和圖形可用。其緊湊的尺寸(由於兩個外殼尺寸的可用性),雙P/J同源,超寬遮陽板,VPS防曬霜(可調節在各種位置,並配備了自動縮回系統),AirBooster技術上部通風系統, 旋轉的下巴護罩與橢圓運動,獨家雙動作下巴保護打開機制,雙槓桿微鎖2保持系統與微量調整,創新的Clma舒適內舒適襯墊(與微穿孔織物和可調頸卷)和設置為N-Com通信系統都是為什麼N100-5已經非常讚賞最苛刻的摩托車遊客。

特徵:

• 遮陽板:超寬,由雷克桑製成,耐刮塗層
• 太陽Visor UV 400: 黑暗紳士, 由 Lexan 製成, 耐刮塗層
• 內部:可拆卸和可清洗、可拆卸的頸墊
• 通風:空氣助推器技術
• 閉合:微鎖閉合,實現最大安全性
• 附加設備:眼鏡通道準備、單手操作的雙動作下巴扣,將意外打開的風險降至最低,用於開行的下巴鎖(P/J 雙同源),橢圓形下巴部分機構,在磨損打開時將下巴部分拉近外殼

規格:

• 歐洲經委會 22.05
• 重量:約1650克
• 2 個頭盔外殼尺寸:XXS-M 和 L-3XL

N-Com 相容性:

• B901L R 系列 / B901 R / B601 R 系列 / B1.4 / ESS / MCS III R 系列

技術:

• P/J 同源化:頭盔以P/J雙配置批准,因為可拆卸保護下巴護罩(帶進氣口)已通過聯合國/歐洲經委會全臉頭盔條例要求的同源測試。
• 超寬遮光板:S/R(耐刮)遮陽板的大表面使得具有更寬廣的視野,也具有橫向視野,從而高度提高了主動安全性。它還能夠保護騎手的臉部免受水和風的影響,同時保證頭盔內的空氣流通,如果用於"Jet"配置。
• PINLOCK®霧耐磨內遮陽板:由於獲得專利的調節系統®Pinlock的拉伸,內遮陽板可以調節,從遮陽板的外部作用,而無需拆卸。根據 Pinlock ®的許可採用的全矽膠邊界 (FSB), 首先允許增加位於頭盔外部和內部之間的空氣室的大小, 從而進一步降低霧化的風險;其次,它降低了刮傷到遮陽板的風險。
• VPS 防光:由 LEXAN 製成,經過 S/R(耐刮)和 F/R(防霧)處理,可提供高達 400 奈米的紫外線防護。它可以很容易地拆卸進行維護和清潔,並且完全可調節。
• 通風系統 –AirBooster 技術:獨家的"AirBooster 技術"上部系統可確保在騎手頭部最需要的地方實現最佳通風:空氣從上部進氣口中抽取並強制進入最關鍵的區域,避免任何分散,從而在極端騎行條件下確保最大的舒適度。
• 欽衛兵旋轉與橢圓形軌跡(專利):下巴護罩旋轉運動與橢圓軌跡,使有可能保持頭盔前部的總大小到最小,當下巴護罩是開放的。因此,"密封"效果被高度降低,即使抬起下巴護罩,騎行舒適性仍然得到保證。
• 雙作用(專利):獨家(專利)雙動作下巴護罩打開系統。它位於下巴護罩的中心,允許輕鬆的單手開口。雙動作打開機制可降低意外打開的風險:只需操作第一個釋放桿(或安全鎖),然後啟動第二個操縱桿,才能打開下巴護罩。
• MICROLOCK2(專利):雙槓桿固定系統,帶微度調節。該系統由熱塑性人體工程學開口桿和第二個鋁齒和保持桿組成。齒形操縱桿釋放微測帶,因此下巴帶只能通過打開桿的非常廣泛的旋轉打開。此設備最大限度地減少了意外打開保留系統的可能性。
• 單塊 CHEEK PAD: 與傳統的襯墊相比,用於面頰墊的膨脹泡沫內部襯墊旨在提供卓越的均勻壓力和一致的性能。它也可以從織物覆蓋物上去除,使洗滌後者更容易。
• CLIMA 舒適內部舒適填充:一個新概念,內部襯墊由雙密度微穿孔織物製成。結合「空氣助推器技術」上部通風系統,它分配空氣在騎手頭部的上部。防風罩的形狀有助於關閉護下巴,防止下巴區域的空氣刺激性氣流。
• NECK-ROLL:可拆卸、可洗和可調,因此很容易適應騎手的形式和不同騎行位置所產生的各種設置。
• 聚苯乙烯內面臉頰墊的模壓襯裡:頭盔具有創新的模制襯裡,用於聚苯乙烯內面墊,從而更精確地適合織物內面頰墊。這種襯裡為產品提供高品質的表面處理,也為N-Com通訊系統的耳機提供了外殼。
• 為 N-COM 做好準備:頭盔的安裝和批准與安裝的 N-Com 通訊系統和創新的 ESS(緊急停止信號)。

內容:

• 1x 諾蘭 N100-5 山頂 N-com 頭盔
• 1x 引腳鎖鏡頭 (FSB 4L)

Nolan N100-5 Hilltop N-Com Helmet

This is Nolan’s top-of-the-range flip up helmet. It is characterised by its elegant design, its many technical features and the wide range of colours and graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, an ultrawide visor, VPS sun screen (adjustable in various positions and fitted with the automatic retraction system), AirBooster Technology upper ventilation system, rotation of the chin-guard with elliptical motion, exclusive double-action chin-guard opening mechanism, double lever Microlock2 retention system with micrometric adjustment, innovative Clima Comfort inner comfort padding (with micro- perforated fabrics and adjustable neck-roll) and set up for the N-Com communication system are all reasons why the N100-5 is already very-much-appreciated by the most demanding of motorbike tourists.

Features:

• Visor: extra wide, made of Lexan, scratch-resistant coated
• Sun Visor UV 400: dark gentian, made of Lexan, scratch-resistant coated
• Interior: removable and washable, removable neck pads
• Ventilation: Airbooster Technology
• Closure: Microlock closure for maximum safety
• Additional equipment: glasses channel Preparation, dual action chin-buckle with one-handed operation that minimizes the risk of accidental opening, chinrest lock for open driving (P/J double homologation), elliptical chin-part mechanism that pulls the chin part closer to the shell when worn open

Specifications:

• ECE 22.05
• weight: approx. 1650 g
• 2 helmet shell sizes: XXS-M and L-3XL

N-Com compatibility:

• B901L R series / B901 R / B601 R series / B1.4 / ESS / MCS III R series

Technologies:

• P/J Homologation: The helmet is approved in P/J double configuration, as the removable protective chin guard (complete with air intake) has passed the homologation tests required by UN/ECE regulations for full-face helmets.
• ULTRAWIDE VISOR: The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. It is also able to protect the rider’s face from water and wind while guaranteeing air circulation within the helmet, if used in “Jet” configuration.* LEXANTM* IS A TRADEMARK OF SABIC
• PINLOCK® FOG-RESISTANT INNER VISOR: Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior and interior, thus further reducing the risk of fogging; secondly, it reduces the risk of scratches to the visor.
• VPS SUNSCREEN: Moulded out of LEXAN, it is S/R (Scratch Resistant) and F/R (Fog Resistant) treated and offers UV protection up to 400 nanometres. It can be easily removed for maintenance and cleaning and is fully-adjustable.
• VENTILATION SYSTEM +AIRBOOSTER TECHNOLOGY: The exclusive “AirBooster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake and forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions.
• CHIN GUARD ROTATION WITH ELLIPTICAL TRAJECTORY (patented): The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “seal” effect is consequently highly reduced and riding comfort is still guaranteed, even when the chin guard is lifted.
• DUAL ACTION (patented): Exclusive (patented) DUAL ACTION chin guard opening system. Positioned in the centre of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) and then activating the second lever.
• MICROLOCK2 (patented): Double lever retention system with micrometric adjustment. This system consists of a thermoplastic ergonomic opening lever, and of a second aluminium toothed and holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system.
• SINGLE-BLOCK CHEEK PADS: The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure and consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier.
• CLIMA COMFORT INNER COMFORT PADDING: A new concept, the inner padding is made with double density micro perforated fabric. Combined with the "AirBooster Technology" upper ventilation system, it distributes air in the upper part of the rider's head. The shape of the wind shield aids the closing of the chinguard and protects from irritating drafts of air in the chin area.
• NECK-ROLL: Removable, washable and adjustable, consequently easily adaptable to the form of the rider and the various set-ups resulting from differing riding positions.
• MOULDED LINING FOR THE INNER CHEEK PADS IN POLYSTYRENE: The helmet has an innovative moulded lining for the internal cheek pads in polystyrene which allows for a more precise fitting of the fabric inner cheek pads. This lining, which gives the product a quality finish, also provides the housing for the earphones of the N-Com communication system.
• READY FOR N-COM: The helmet is set up and approved with installed N-Com communication system and with the innovative ESS (Emergency Stop Signal).

Contents:

• 1x Nolan N100-5 Hilltop N-Com Helmet
• 1x Pinlock Lens (FSB 4L)