Nolan N100-5 Plus Destinctive N-Com 頭盔

諾蘭 N100-5 加命運 N-Com 頭盔

最新和最獨特的版本的諾蘭的頂級翻轉頭盔，在這裡增強了與Clima舒適內襯與它的創新網路建設和調整系統的位置襯裡（LPC - 襯裡定位控制）。新的技術含量伴隨著運動和優雅的外觀和內部舒適襯墊的完整風格大修。綜合的技術功能，使N100-5在最苛刻的摩托車遊客中高度讚賞的產品都存在：緊湊的尺寸（由於兩個外殼尺寸的可用性），雙P/J同源，超寬遮陽板，VPS防曬霜（可調節在各種位置，並配有自動回縮系統），AirBooster技術上部通風系統，旋轉下巴護罩與橢圓形旋轉，獨特的雙動作下巴護套打開機構，雙杠杆 Microlock2 固定系統，具有微量調節、Clima 舒適內襯（帶微穿孔織物和可調節頸輥），並針對 N-Com 通信系統設置。

特徵：

• 遮陽板：超寬，由萊克桑製成，防刮塗層
• 遮陽板 UV 400 保護：深色，由 Lexan 製成，防刮塗層，可調節各種位置
• 氣候舒適內飾：可拆卸和可洗，可拆卸頸部墊
• 襯裡定位控制系統 （LPC）：借助便於使用的調整帶，可以單獨調整 N100-5 Plus 的車內高度，從而將頭盔位置調節到佩戴者頭部的形狀
• 通風：空氣增壓技術，實現最佳通風
• 閉合：微鎖2
• 可選額外：眼鏡通道準備，雙動作下巴帶封閉與單手操作，以儘量減少意外打開的風險，下巴帶鎖杆開放駕駛（P/J雙同源），橢圓形下巴帶機構，移動下巴帶接近杯時磨損打開

規格：

• 歐洲經委會 22.05
• 重量：約1700克

N-Com 相容性：

• B901LR / B901R / B601 R / B1.4 / MCS III / ESS

技術：

• P/J 同源：頭盔採用 P/J 雙配置認證，因為可拆卸的防護下巴防護罩（帶氣源）已通過聯合國/歐洲經委會全臉頭盔法規所要求的認證測試。
• 超寬遮陽板：S/R（防刮）遮陽板的大表面使視野更寬，橫向，從而提高主動安全性。如果用於"Jet"配置，它還能夠保護騎手的臉免受水和風的影響，同時保證頭盔內的空氣流通。
• Pinlock®防霧內遮陽板：得益于專利調節系統，Pinlock®內遮陽板的拉伸可以從遮陽板外部進行調節，無需拆卸。根據 Pinlock ® 許可證採用的全矽膠邊界 （FSB） 首先允許增加位於頭盔外部和內部之間的空氣室的大小，從而進一步降低霧化風險;其次，它降低了對遮陽板劃傷的風險。
• VPS 防曬霜：由 LEXAN 製成，經過 S/R（耐刮擦）和 F/R（防霧）處理，提供高達 400 納米的紫外線防護。它可以很容易地拆卸維護和清潔，並完全可調。
• 單片式 Cheek 墊：面頰墊的膨脹泡沫內部襯墊經過設計，與傳統襯墊相比，隨著時間的推移提供卓越的均勻壓力和一致的性能。它也可以從織物覆蓋物上去除，使後者的洗滌更容易。
• Clima 舒適內舒適襯墊：一個新概念，內襯由雙密度微穿孔織物製成。結合"空氣助推器技術"上部通風系統，它分配空氣在騎手的上部頭部。頸輥可拆卸、可清洗和可調節，因此易於適應騎手的形式以及因騎行位置不同而產生的各種設置。
• 襯裡與創新網結構：（僅適用于N100-5 PLUS）襯裡，與創新的網結構，進一步協助空氣運動周圍的騎手頭部。N100-5 Plus 還具有面頰墊的特殊形狀，可進一步防止風口。
• 聚苯乙烯內面面墊的模制襯裡：頭盔具有聚苯乙烯內面面墊的模制襯裡，允許更精確地安裝織物內臉頰墊。這種襯裡為產品提供了品質光潔度，也為N-Com通信系統的耳機提供了外殼。
• 空氣增壓器技術：獨特的"空氣助推器技術"上部系統確保乘客頭部最需要的最佳通風：空氣從上部進氣口提取，並強制進入最關鍵的區域，避免任何分散，保證在極端騎行條件下也能獲得最大的舒適度。
• 帶橢圓軌跡的下巴防護旋轉（專利）：當下巴護罩打開時，具有橢圓軌跡的下巴防護旋轉運動使得頭盔前部分的總尺寸保持在最小。因此，"密封"效果大大降低，即使提升下巴護罩，騎乘舒適性也得到保證。
• 雙動作（專利）：獨家雙動作下巴護罩打開系統。它位於下巴護罩的中心，允許輕鬆的單手開口。雙操作打開機構可降低意外打開的風險：僅操作第一釋放杆（或安全鎖）即可打開下巴護罩，然後啟動第二個操縱杆。
• 微鎖2（專利）：它是一種專利的雙杠杆固定系統，具有微量調整。它由熱塑性人體工學開杆和第二個鋁齒形和保持杆組成。齒形拉杆釋放顯微度條，因此下巴帶只能在非常寬的旋轉杆下打開。此設備將意外打開保留系統的可能性降至最低。
• LPC - 襯墊定位控制（僅適用于 N100-5 PLUS）：此系統允許調節襯墊的位置，這意味著頭盔可以適應變英要求和頭部形狀，而無需更改尺寸。
• 設置 N-COM 通信系統：頭盔安裝並獲得批准，並安裝了 N-Com 通信系統，並配有創新的 ESS（緊急停止信號）。

內容：

• 1x 諾蘭 N100-5 加 N-Com 頭盔
• 1x 平鎖鏡頭 （FSB 4L）

Nolan N100-5 Plus Destinctive N-Com Helmet

The latest and most exclusive version of Nolan’s top-of-the-range flip up helmet, here enhanced with Clima Comfort inner padding with its innovative net construction and adjustment system for the position of the liner (LPC - Liner Positioning Control). The new technical content is accompanied by a sporty and elegant look and a complete style overhaul of the inner comfort padding. The consolidated technical features that make the N100-5 a highly appreciated product among the most demanding of motorbike tourists are all present: compact size (thanks to the availability of two outer shell sizes), double P/J homologation, ultrawide visor, VPS sunscreen (adjustable in various positions and fitted with the automatic retraction system), AirBooster Technology upper ventilation system, rotation of the chin guard with elliptical rotation, exclusive double-action chin guard opening mechanism, double lever Microlock2 retention system with micrometric adjustment, Clima Comfort inner padding (with micro-perforated fabrics and adjustable neck- roll) and set up for the N-Com communication system.

Features:

• visor: ultra-Wide, made of Lexan, scratch-resistant coated
• sun visor UV 400 Protection: dark tinted, made of Lexan, scratch-resistant coated, adjustable in various positions
• clima Comfort interior: removable and washable, removable neck cushion
• Liner Positioning Control System (LPC): with the help of an easy-to-use adjustment strap, the height of the interior and thus the helmet position of the N100-5 Plus can be individually adjusted to the shape of the wearer's head
• Ventilation: Airbooster Technology for optimal ventilation
• Closure: Microlock2
• Optional extras: eyeglass channel preparation, dual action chin strap closure with one-hand operation to minimize the risk of accidental opening, chin strap lock lever for open driving (P/J double homologation), elliptical chin strap mechanism that moves the chin strap closer to the cup when worn open

Specifications:

• ECE 22.05
• weight: approx. 1700 g

N-Com compatibility:

• B901LR / B901R / B601 R / B1.4 / MCS III / ESS

Technologies:

• P/J Homologation: The helmet is approved in P/J double configuration, as the removable protective chin guard (complete with air intake) has passed the homologation tests required by UN/ECE regulations for full-face helmets.
• Ultrawide Visor: The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. It is also able to protect the rider’s face from water and wind while guaranteeing air circulation within the helmet, if used in “Jet” configuration.* LEXANTM* IS A TRADEMARK OF SABIC
• Pinlock® fog-resistant inner visor: Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior and interior, thus further reducing the risk of fogging; secondly, it reduces the risk of scratches to the visor.
• VPS Sunscreen: Moulded out of LEXAN, it is S/R (Scratch Resistant) and F/R (Fog Resistant) treated and offers UV protection up to 400 nanometres. It can be easily removed for maintenance and cleaning and is fully-adjustable.
• Single-Piece Cheek Pads: The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure and consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier.
• Clima Comfort Inner Comfort Padding: A new concept, the inner padding is made with double density micro perforated fabric. Combined with the “AirBooster Technology” upper ventilation system, it distributes air in the upper part of the rider’s head. The neck-roll is removable, washable and adjustable, consequently easily adaptable to the form of the rider and the various set-ups resulting from differing riding positions.
• Liner with an innovatice net construction: (available only on N100-5 PLUS) The liner, with an innovative net construction, further aids the movement of air around the upper part of the riders head. The N100-5 Plus is also characterised by the particular shape of the cheek pads, which provide further protection against draughts.
• Moulded lining for the inner cheek pads in Polystyrene: The helmet has a moulded lining for the internal cheek pads in polystyrene which allows for a more precise fitting of the fabric inner cheek pads. This lining, which gives the product a quality finish, also provides the housing for the earphones of the N-Com communication system.
• Airbooster Technology: The exclusive “AirBooster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake and forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions.
• Chin Guard rotation with elliptical trajectory (patented): The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmets front section to a minimum, when the chin guard is open. The “seal” effect is consequently highly reduced and riding comfort is still guaranteed, even when the chin guard is lifted.
• Dual Action (patented): Exclusive Dual Action chin guard opening system. Positioned in the centre of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) and then activating the second lever.
• Microlock2 (patented): It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, and of a second aluminium toothed and holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system.
• LPC - Liner Positioning Control (available only on N100-5 PLUS): This system allows for the regulating of the position of the liner to be adjusted, meaning that the helmet can be adapted to var ying requirements and head shapes without changing the size.
• Set up for N-COM Communication System: The helmet is set up and approved with installed N-Com communication system and with the innovative ESS (Emergency Stop Signal).

Contents:

• 1x Nolan N100-5 Plus N-Com Helmet
• 1x Pinlock Lens (FSB 4L)