Nolan N100-5 Plus Overland N-Com 頭盔

諾蘭 N100-5 加陸上 N-com 頭盔

諾蘭的頂級翻轉頭盔的最新和最獨家的版本,在這裡增強了與Cllima舒適內襯與創新的網構建和調整系統的位置襯裡(LPC - 襯裡定位控制)。新的技術內容伴隨著運動和優雅的外觀和內部舒適襯墊的完整風格大修。綜合技術功能,使N100-5高度讚賞的產品,在最苛刻的摩托車遊客都存在:緊湊的尺寸(由於兩個外殼尺寸的可用性),雙P/J同源, 超寬遮陽板、VPS防曬霜(可在各種位置調節,並配有自動縮回系統)、AirBooster技術上部通風系統、帶橢圓旋轉的下巴護罩旋轉、獨佔雙動作下巴護罩打開機構、帶微測調整的雙槓桿 Microlock2 固定系統、帶微穿孔的壓孔和可調頸部卷的 Clima 舒適內襯系統,以及為 N-Com 通信系統設置。

特徵:

• 遮陽板:超寬,由雷克桑製成,耐刮塗層
• 遮陽板 UV 400 保護:深色,由 Lexan 製成,耐刮擦塗層,可在各種位置調節
• 氣候舒適內飾:可拆卸和可洗,可拆卸的頸部墊
• 襯裡定位控制系統 (LPC):藉助易於使用的調節帶,N100-5 Plus 的內部高度和頭盔位置可以單獨調整為佩戴者頭部的形狀
• 通風:空氣助推器技術,實現最佳通風
• 閉合:微鎖2
• 可選附加功能:眼鏡通道準備、單手操作的雙動作下巴帶閉合以盡量減少意外打開的風險、用於開路(P/J 雙同源)的下巴帶鎖桿、在佩戴打開時將下巴帶移近杯的橢圓形下巴帶機構

規格:

• 歐洲經委會 22.05
• 重量:約1700克
• 2 個頭盔外殼尺寸:XXS-M 和 L-3XL

N-Com 相容性:

• B901LR / B901R / B601 R / B1.4 / MCS III / ESS

技術:

• P/J 同源化:頭盔以P/J雙配置批准,因為可拆卸保護下巴護罩(帶進氣口)已通過聯合國/歐洲經委會全臉頭盔條例要求的同源測試。
• 超寬遮陽板:S/R(防刮)遮陽板的大表面使得具有更寬廣的視野,也具有橫向的視野,從而高度提高了主動安全性。它還能夠保護騎手的臉部免受水和風的影響,同時保證頭盔內的空氣流通,如果用於"Jet"配置。
• Pinlock®防霧內遮陽板:由於獲得專利的調節系統®Pinlock、內遮陽板的拉伸可以從遮陽板的外部進行調節,無需拆卸。根據 Pinlock ®的許可採用的全矽膠邊界 (FSB), 首先允許增加位於頭盔外部和內部之間的空氣室的大小, 從而進一步降低霧化的風險;其次,它降低了刮傷到遮陽板的風險。
• VPS 防曬:由 LEXAN 製成,經過 S/R(防刮)和 F/R(防霧)處理,可提供高達 400 奈米的紫外線防護。它可以很容易地拆卸進行維護和清潔,並且完全可調節。
• 單件面頰墊:與傳統墊墊相比,用於面頰墊的膨脹泡沫內襯墊旨在提供卓越的均勻壓力和一致的性能。它也可以從織物覆蓋物上去除,使洗滌後者更容易。
• Clima 舒適內部舒適填充:一個新概念,內襯墊由雙密度微穿孔織物製成。結合「空氣助推器技術」上部通風系統,它分配空氣在騎手頭部的上部。頸輥是可拆卸的,可洗和可調的,因此很容易適應騎手的形式和各種設置產生的不同的騎位。
• 具有創新網結構的襯裡:(僅在 N100-5 PLUS 上提供)該襯墊採用創新網結構,進一步有助於騎手頭部上部的空氣移動。N100-5 Plus 還具有面頰墊的特殊形狀,可進一步防止風 。
• 聚苯乙烯內面墊的模制襯裡:頭盔具有聚苯乙烯內面頰墊的模制襯裡,允許更精確地適合織物內面頰墊。這種襯裡為產品提供高品質的表面處理,也為N-Com通訊系統的耳機提供了外殼。
• Airbooster 技術:獨家的"AirBooster 技術"上部系統可確保在騎手頭部最需要的地方實現最佳通風:空氣從上部進氣口中抽出並強制進入最關鍵的區域,避免任何分散,從而在極端騎行條件下確保最大的舒適度。
• 具有橢圓形軌跡的欽衛兵旋轉(專利):當下巴護罩打開時,具有橢圓形軌跡的欽衛兵旋轉運動可以保持頭盔前部的總尺寸。因此,"密封"效果被高度降低,即使抬起下巴護罩,騎行舒適性仍然得到保證。
• 雙動作(專利):獨家雙動作下巴護罩打開系統。它位於下巴護罩的中心,允許輕鬆的單手開口。雙動作打開機制可降低意外打開的風險:只需操作第一個釋放桿(或安全鎖),然後啟動第二個操縱桿,才能打開下巴護罩。
• Microlock2(專利):它是一種專利雙槓桿固定系統,具有微度調整功能。它包括一個熱塑性人體工程學的開口桿,以及第二個鋁齒和保持桿。齒形操縱桿釋放微測帶,因此下巴帶只能通過打開桿的非常廣泛的旋轉打開。此設備最大限度地減少了意外打開保留系統的可能性。
• LPC - 襯裡定位控制(僅在 N100-5 PLUS 上提供):此系統允許調整襯墊位置,這意味著頭盔可以適應瓦英要求和頭部形狀,而無需更改尺寸。
• 為 N-COM 通訊系統設置:頭盔安裝並批准安裝為 N-Com 通訊系統,並採用創新的 ESS(緊急停止信號)。

內容:

• 1x 諾蘭 N100-5 加陸上 N-com 頭盔
• 1x 引腳鎖鏡頭 (FSB 4L)

Nolan N100-5 Plus Overland N-Com Helmet

The latest and most exclusive version of Nolan’s top-of-the-range flip up helmet, here enhanced with Clima Comfort inner padding with its innovative net construction and adjustment system for the position of the liner (LPC - Liner Positioning Control). The new technical content is accompanied by a sporty and elegant look and a complete style overhaul of the inner comfort padding. The consolidated technical features that make the N100-5 a highly appreciated product among the most demanding of motorbike tourists are all present: compact size (thanks to the availability of two outer shell sizes), double P/J homologation, ultrawide visor, VPS sunscreen (adjustable in various positions and fitted with the automatic retraction system), AirBooster Technology upper ventilation system, rotation of the chin guard with elliptical rotation, exclusive double-action chin guard opening mechanism, double lever Microlock2 retention system with micrometric adjustment, Clima Comfort inner padding (with micro-perforated fabrics and adjustable neck- roll) and set up for the N-Com communication system.

Features:

• visor: ultra-Wide, made of Lexan, scratch-resistant coated
• sun visor UV 400 Protection: dark tinted, made of Lexan, scratch-resistant coated, adjustable in various positions
• clima Comfort interior: removable and washable, removable neck cushion
• Liner Positioning Control System (LPC): with the help of an easy-to-use adjustment strap, the height of the interior and thus the helmet position of the N100-5 Plus can be individually adjusted to the shape of the wearer's head
• Ventilation: Airbooster Technology for optimal ventilation
• Closure: Microlock2
• Optional extras: eyeglass channel preparation, dual action chin strap closure with one-hand operation to minimize the risk of accidental opening, chin strap lock lever for open driving (P/J double homologation), elliptical chin strap mechanism that moves the chin strap closer to the cup when worn open

Specifications:

• ECE 22.05
• weight: approx. 1700 g
• 2 helmet shell sizes: XXS-M and L-3XL

N-Com compatibility:

• B901LR / B901R / B601 R / B1.4 / MCS III / ESS

Technologies:

• P/J Homologation: The helmet is approved in P/J double configuration, as the removable protective chin guard (complete with air intake) has passed the homologation tests required by UN/ECE regulations for full-face helmets.
• Ultrawide Visor: The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. It is also able to protect the rider’s face from water and wind while guaranteeing air circulation within the helmet, if used in “Jet” configuration.* LEXANTM* IS A TRADEMARK OF SABIC
• Pinlock® fog-resistant inner visor: Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior and interior, thus further reducing the risk of fogging; secondly, it reduces the risk of scratches to the visor.
• VPS Sunscreen: Moulded out of LEXAN, it is S/R (Scratch Resistant) and F/R (Fog Resistant) treated and offers UV protection up to 400 nanometres. It can be easily removed for maintenance and cleaning and is fully-adjustable.
• Single-Piece Cheek Pads: The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure and consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier.
• Clima Comfort Inner Comfort Padding: A new concept, the inner padding is made with double density micro perforated fabric. Combined with the “AirBooster Technology” upper ventilation system, it distributes air in the upper part of the rider’s head. The neck-roll is removable, washable and adjustable, consequently easily adaptable to the form of the rider and the various set-ups resulting from differing riding positions.
• Liner with an innovatice net construction: (available only on N100-5 PLUS) The liner, with an innovative net construction, further aids the movement of air around the upper part of the riders head. The N100-5 Plus is also characterised by the particular shape of the cheek pads, which provide further protection against draughts.
• Moulded lining for the inner cheek pads in Polystyrene: The helmet has a moulded lining for the internal cheek pads in polystyrene which allows for a more precise fitting of the fabric inner cheek pads. This lining, which gives the product a quality finish, also provides the housing for the earphones of the N-Com communication system.
• Airbooster Technology: The exclusive “AirBooster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake and forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions.
• Chin Guard rotation with elliptical trajectory (patented): The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmets front section to a minimum, when the chin guard is open. The “seal” effect is consequently highly reduced and riding comfort is still guaranteed, even when the chin guard is lifted.
• Dual Action (patented): Exclusive Dual Action chin guard opening system. Positioned in the centre of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) and then activating the second lever.
• Microlock2 (patented): It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, and of a second aluminium toothed and holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system.
• LPC - Liner Positioning Control (available only on N100-5 PLUS): This system allows for the regulating of the position of the liner to be adjusted, meaning that the helmet can be adapted to var ying requirements and head shapes without changing the size.
• Set up for N-COM Communication System: The helmet is set up and approved with installed N-Com communication system and with the innovative ESS (Emergency Stop Signal).

Contents:

• 1x Nolan N100-5 Plus Overland N-Com Helmet
• 1x Pinlock Lens (FSB 4L)