Place the article you want in the basket then during the order process select the shipment and payment method “Pick up in store.”
As soon as the article is ready to be picked up in store we will send you an email notification. From this point you have 14 days to pick up your order. At the end of this period your
reservation will be cancelled. You can try on the desired articles (max. 10) without obligation in the store.
Your desired article is only available at the store in Würselen.
Würselen store
Order your product online for pick-up at the store.
How it works
DENALI S4 LED Additional Lighting 10W - By Unit (2x)
The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced, the S4 provides more light per dollar than just about anything else on the market. In fact, the S4 features the same high intensity LEDs as the D-Series lights, but utilize a single-piece optic and sealed beam construction to reduce the number of components. The DENALI S4's fixed lens features two flood optics and two spot optics to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing.
Features :
High-Intensity Series Cree LEDs outputting 3066lumens per pod
DrySeal™ Submersible Waterproof light can withstand the most extreme environments
LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
Low profile mounting bracket with stainless steel hardware included
Specifications :
Power Draw: 2,3 Amps
Beam Distance: 115m
Beam Width: 23m
Raw Lumens: 3066
Intensity: Single Intensity Harness
DataDim™ Compatible: Yes
DialDim™ Lighting Controller
Allows to sell a complete solution with easy control of all light functions
Independently turn on/off and dim two sets of auxiliary lights from a single switch
LED halo switch displays your exact settings
Unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.
On/Off & Dim
Independently control two sets of lights on/off and intensity level using the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits.
High/Low Sync
Your auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle high beam circuit to enable this feature.
Stealth Mode
A clever 0% dim setting on the switch allows your lights to be "off" during normal driving conditions but will jump to 100% intensity with your vehicle high beam switch. The lights will also react to turn signal and horn inputs in this mode but will remain off when no inputs are detected.
Cancel with Turn Signal
When enabled the main lights (blue circuit 1) will cancel in sync with your signal to prevent "washing out" your factory turn signal. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
Flash as Turn Signal
When enabled your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
Strobe with Horn
When enabled your auxiliary lights on both circuits will strobe at 4Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature.
Electronically Fused Circuits
Both light circuits are electronically fused and can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fused is tripped.
Voltage Display Indicator
Upon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v.
Low Voltage Cutoff
If battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. The switch halo will flash 4 red LEDs to indicate the low voltage condition.
Product features
Light type: LED
Packing: 3 Stck.
Color: Schwarz
Width (mm): 70mm
Length (mm): 86mm
Homologation: Schweizer Zulassung, bitte beachten Sie die Asa 2b Richtlinien
Position: vorne
Material: Aluminium
Range: S4
Controller: DialDim
Ratings (1)
Customer ratings for DENALI Universal Kit S4 DialDim
Number of ratings: 1
Average rating: 5
1 Englishall
excellent(02.07.2025)
Anonymous1130655505
I installed the pair of s4 on my 2008 Suzuki DL650 Vstrom and I'm very satisfied by their performance. They add more light and width to my low beam at 30% and they compliment very well the high beam at 100%. However, they don't light as far as the high beam, maybe because I installed them low on the crash bars but they light far enough and all the surrounding area of the bike and give the feel that it's a large vehicle on the road. The installation was very easy and I haven't used the other functions of the dialdim (off with turn signals, strobe with horn). I would like sometime to add a pair of Denali D3 spots to light up together with the high beam for extra long distance.
Size chart
We want everything to fit right . Take some quick measurements if you are unsure of your current clothes size. The most accurate measurements will be those you take in your underwear, applying the measuring tape directly to your body.
Please note that the information in this size chart is not specific to the manufacturer's products as we currently do not have the manufacturer's original size chart. The details in the size charts are not binding and are for guidance only. If something does not fit you, of course you can exchange the goods with us (see FAQ Exchange / Complaint).
100 Days Right Of Return
Free delivery from 
top rating at Trustpilot, Idealo ...
