Insta360 X3 Sticky Lens Guards

Insta360 X3 Sticky Lens Guards

With the lens protector from Insta360, the lens of your camera is always protected from scratches. It sticks directly to the lens to protect it from dust and scratches.

Features:

• Protection for both of your lenses.
• Keeps lenses safe from dust or scratches.

Specifications:

Technical specifications:

• Material: Polymethyl methacrylate (PMMA)
• Weight: 1.5g (0.05oz) / 1 piece
• Dimensions (D x H): 34.80 x 10.95 mm (1.37 x 0.43 in)

Notes:

1. Before use, make sure that the camera's lens is clean and dry. Always install the Lens Guard in a clean and dry environment. Check carefully for dust or other particles, as these may affect shooting results.
2. Prior to installing, ensure that the thin guard is installed on the side with the camera screen, with the thick guard used for the opposite side.
3. If you remove the Lens Guard from X3, apply a new double-sided adhesive before re-installing the Lens Guard.
4. The Sticky Lens Guard is only splash-proof and is not designed for underwater shooting. If you are planning to use the X3 underwater, remove the Sticky Lens Guard and use the X3 Dive Case for best results.
5. To remove the Lens Guards, please use the included Triangle Prying Tool. Take care not to scratch the camera lenses as you remove the Lens Guards.
6. To change the double-sided adhesives, first remove the used double-sided adhesives and be sure that the inside of the Lens Guard is clean and has no residue. Repeat the installation process, ensuring the notch on the rim of the Lens Guard is correctly aligned.

Contents:

• 2x Sticky Lens Guards
• 6x Double-sided Adhesive Strips
• 1x Triangular Pry Tool
• 1x Lens Cloth

Note:

• Do not use the adhesive lens protector in or near water.
• The lens protector comes with the double-sided adhesive strips already attached