LSL Universal Clamp Kit Ø 28,6 mm

X-Bar universal clamping blocks

For the use of X-Bar handlebars (28.6 mm), LSL offers the necessary clamping blocks for bolting to the original fixing points of the upper triple clamps. The clamping blocks are CNC-milled from high-quality solid aluminium. They replace the standard clamping blocks to achieve a different height and a better appearance. They can be mounted in the original mounting points with centered M10 x 1.25 mm screws can be mounted. For models with rubber bearings, this is retained.<Note: Please check if your vehicle is listed in the ABE and find out the required bolt length. <This item is only unregistered if your motorcycle is assigned to the KM45/KG45 clamp in the enclosed ABE and if all conditions are observed.
For vehicles that are not listed in the model list, an approval by acceptance according to the model list is required. § 19(2) StVZO possible.

Determine the screw length:
Measure the length of the original screws by which they look out of the original clamping blocks. Add 16mm (=distance from the screw head support to the lower edge of the LSL clamping block) and, if necessary, the thickness of the selected support.

fitting heightening by 15 or 25 mm: 127UN0...

ATTENTION! For motorcycles with firmly cast 22.2 mm handlebar mount, please use the adapters Art.No. 127RK25...

Material: aluminium
Material treatment: CNC-milled, anodized
Fixing: central screwing at the standard holding points with M10x1,25mm screws
clamping block KM45: lower edge of clamping block to middle of handlebar 45 mm
Dimensions: 28,6 mm clamping, for handlebars with a Ø of 28,6 mm

Scope of delivery:
- Clamping blocks (KM45) 1 pair
- Screws M8x25 4 pieces
- Screws M10x1,25 2 pieces in the selected length
- Washers M10 2 pieces
- Nuts M10x1,25 (self-locking) 2 pieces