CLUBMAN Handlebar S1 Clubman®, 22 мм, сталь

Руль S1 Clubman®
Спортивный коленчатый, как старые модели R 50.

Классика изготовлена из высокой прочности стали, внешней 22,0 мм, толщина стены 2,0 мм, доступна в хромированном или с покрытием.

Следующие статьи подходят для этого продукта:
Универсальныекламы:
121KL60SW
121KL60SI
121RD25SW
121RD25SI

Гтбр/Гттвесы:
138LG1418SW
135-006РТ
135-D07GO
136AL18RT
136AL18RT

Ручки:
138G125SW
138RL01SW
138G125GO
138G125SI


Шаблон бурения:
902DT01

Сфера поставок:1 шт.

Инструкции по уходу:
- Для всех рулей и их поверхностных вариантов используются только безкислотные и щелочные очистители! Не позволяйте высохнуть.
- Избегайте контакта с тормозной жидкостью, очистителем тормозов, маслом, топливом, полировкой паст с абразивными частицами и т.д., капайте сразу с мягкой тканью.
- Перед использованием чистящих средств, проверить совместимость в незаметном месте!
- Нет гарантии или гарантии в случае неправильной очистки и ухода.

LSL steel handlebars 22.0mm
Sporty offset, as on the old R 50 models.

LSL stands for outstanding handlebar quality. This is due to the company's own selection of materials and the manufacturing quality of the handlebars, which has been optimized over decades.
The steel handlebars with an outer diameter of 22.0 mm are particularly suitable for use on youngtimers of German and Italian manufacture, as they also had original handlebars with a diameter of 22.0 mm.
The handlebars of some later BMW and Ducati models also had this metric measurement.
The wall thickness of the steel handlebars is 2 mm (inside 18 mm). The surface is high-gloss polished and chrome-plated or black KTL-coated.
The handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the LSL drilling template in order to adopt the position of the holes from the standard handlebars in the best possible way.
The 22.0 mm handlebars are supplied with a parts certificate. The parts certificate lists a few vehicle types as examples, but it can be used on many more vehicles, not all of which we were able to list.
The parts certificate then serves the expert as a sound basis for the individual approval and registration of the handlebars in the vehicle documents.

Scope of delivery: 1 piece

Care instructions:
- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!
- Never use in direct sunlight and do not allow the cleaner to dry out.
- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc. immediately absorb any dripping with a soft cloth.
- Test the compatibility of cleaning agents on an inconspicuous area before use!
- No guarantee or warranty in the event of improper cleaning and care.